Flat Tow Wiring Harness For A 2013 Chrysler 200
Updated 01/27/2026 | Published 08/20/2024
Products Featured in This Question
Question:
I have a 2013 Chrysler 200 which we tow on a Kar kaddy I was looking for a connector that I can connect to the front of the car wiring so the tail lights on the car would also show turn and stop lights Do you have something like that?
asked by: Bob K
Expert Reply:
Yes we do, Bob. What you need is just a flat tow wiring harness for your 2013 Chrysler 200. For that you can use the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-154. This kit will allow you to carry your RV's brake and turn signals to the towed vehicles lights. Basically, you splice in diodes behind the taillights, then run a jumper up to a 4-flat plug on the front of your vehicle.
Keep in mind that this setup uses a 4-flat plug, so you will not be able to plug in the 4-flat on your Kar Kaddy at the same time. If you want to plug in both, you can use the Reese Trailer Connector Adapter # 78118.
Jesse M.
1/27/2026
Hey Bob, how did the wiring setup with the Roadmaster diode kit work out on your Chrysler 200? Your update could make it easier for others towing with a Kar Kaddy to get their lights working right too.