Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Bike Rack Recommendation for 2008 Infiniti G35 that Allows Rear Trunk Lid to Open
Hi, currently looking for a trunk mount for max 2 MTB Orbea Oiz on a 2008 Infiniti G35x. Ideally one that can stay on and allows trunk to open. Do you work with shops in the DMV area that install these? Thanks | Hey Kenneth, there isn't a trunk...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Availability of an A-Frame Coupler that is 45 Degrees and Not 50 Degrees
Is there an A frame coupler that is NOT a 50* angle? I have an older stock trailer and it needs like a 45*. | All of the A-frame couplers we carry are for the standard 50 degree A-frames. What you could do, since your A-frame is a lower angle,...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Is Trailer Suspension U-Bolt Plate Supposed to Bend and What is Torque Spec for 3/8" U-Bolts
So, I noticed in the video the spring plate does bend when tightened. How much torque was used? This is normal on the spring plates? They should bend slightly? I freaked out after I noticed my bent. But this is how it should be? | Trailer...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
Difficulty Hooking on Bottom Trunk Mount Bike Rack Straps to Truck or Hatch
Hello, my trunk is so tight there is not enough space for the hooks to fit at the bottom of the trunk lid for my 2007 Infinity G35. Attaching these hooks under the bumper is not an option because it is very soft and will pucker the bumper. I...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D
Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...
Installation Details for Installing the Curt Trailer Hitch, # 247482 on a 2005 Infiniti G35
have you guys done an install of this hitch on any of the 03-06 sedans? I heard the fishing part is a pain. thanks! | We have a couple of videos featuring an Infiniti G35 but no hitch installations. Fish Wiring can be a little cumbersome,...
How to Correct Sagging Class I Hitch and Bike Rack on 2006 Infiniti G35 Coupe
Wondering if it is possible to have someone weld a higher class hitch to the frame on Infinity G35 coupe? Is this possible? Have a class I now and it is sagging badly Thanks! | Trailer hitch makers generally produce hitches that are designed...
Hitch and Bike Rack Recommendation for a 2000 Isuzu Rodeo
This rack is recommended by your site for the 2000 Isuzu Rodeo, My vehicle has a small spoiler above the back window and cargo rails on top. The spare tire is mounted below the vehicle. We purchased a new mens Diamondback Edgewood and womans...
Trailer Hitch and Ball Recommendation for 2005 Infiniti G35 Sedan
Hi i wanted to know I have a 2005 infiniti g35 sedan and I bought a small boat and i wanted to know what hitch do you guys recommend, and if you guys have 7/8 ball size. thanks | We do have the Curt hitch part # C11482 which you referenced that...
Trailer Hitch Options for a 2004 Isuzu Rodeo with Spare Tire Mounted Underneath
Can I install a trailer hitch with the spare tire mounted underneath on this model. It is a 2 wheel drive. | Yes, there are trailer hitches available for the 2004 Isuzu Rodeo that have the spare tire mounted underneath the vehicle. I have included...
Trailer Hitch For A 2006 Infiniti G35 Coupe
the video i watched was for a sedan. u guys have a hitch for a 2006 g35 coupe? or does the same one fit the sedan and the coupe. thx for any intel. | The Curt Trailer Hitch Receiver # C11483 is the correct trailer hitch for your 2006 Infiniti...
Winch Mount Recommendation for 2013 Polaris RZR-4 XP 900
What winch mount will work for my 2013 rzr xp 4 900? | We have the Bulldog Winch Mount part # BDW15167 which is a confirmed fit for your 2013 Polaris RXR-4 XP 900. You could use it with the part # BDW15001. |
Compatible Trailer Hitch Receiver to Fit 2003 Infiniti G35 M6 Coupe
I just want to know if a trailer hitch is avalaible for my g35 2003 M6. | The Curt # C11483 is designed to fit your 2003 Infiniti G35 coupe. There is some drilling and fascia trimming to install it but all the necessary hardware is included....
Does Duton-Lainson Hand Winch # DL15103 Require Cable Fastener # DL24361 to Secure the Cable
With the above listed winch, do I also need to get item # DL24361 to secure the cable to the winch, or does this come with it. Thanks | Yes, you would need to get the Cable Fastener, # DL24361, to secure the cable to the winch. The winch will...
Drop Shank Recommendation for Taller Vehicle with Equalizer Weight Distribution System
We have a 16’ Airstream with Equal-I-zer, originally towed with an Isuzu Rodeo. We traded the Rodeo for a 2015 Jeep Grand Cherokee with tow package which is taller than our original set-up. Can you recommend an adapter or alternate hitch set-up...
Trailer Hitch Receiver Fit on 2006 Infiniti G35 Sedan
2006 infiniti g35 sedan trailer hitch for this vehicle, if so can you send me that would fit. | There is a trailer hitch receiver that will fit your 2006 Infiniti G3 sedan, with the correct fit for a hitch being the following: - Curt Trailer...
Replacement Exterior Folding Handrail for 2015 Grand Design 385TH Toy Hauler
we have a 2015 grand design momentum 385th toy hauler. will this fit where the one that is on there now looking at just taking it off and replaceing it with yours? it looks the same as ours, yours is just larger. It is mounted on the left...
Filter Your Search
Contact and Help