Can I Bolt the Curt Gooseneck Flat Plate Directly to the Frame on a 2006 GMC Topkick 4500 Chassis?
Looking to install this on a 2006 GMC Topkick 4500 chassis truck. Would I need to install an installation kit with this plate C65500 or bolt it directly to the frame? | Hey Jon. The Curt Gooseneck Flat Plate item # C65500 can be bolted directly...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Availability of Tire Chains for 17.5L-24 Tractor Tires for Kubota MX5100
hi do you have chains to fit my 17.5L-24 tractor tires? not sure how to use your search tool for this application - kubota MX5100 4wd thanks | Hi Glenn; we do have tire chains that for your 17.5L-25 tires on your Kubota MX5100. The search...
Measurements On Draw-Tite Trailer Hitch # 41952
I see the center to center of the holes measure 31 and 1/8. Can I get the measurement from the outside bracket flange to the outside of the other bracket flange? My hope is their gonna measure at 32.5, . | The Draw-Tite Ultra Frame Trailer Hitch...
Recommended Tankless Water Heater Replacement For A Suburban 12 Gallon RV Water Heater
Ok I have a Suburban 12 Gallon Water Heater DSI and 110V, model SW12DEL. Want to pull it ans put a tankless heater in. Question is quick brand? Furrio or Fogatti. And which particular model? | The best tankless replacement for your Suburban...
Does Demco 50-Degree A-Frame Trailer Coupler Bolt On
what size bolts are used with the weld nuts for this coupler. The bolt diameter | The Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2-5/16" Ball - 21K # 12660-97SP does not have any bolt information, with the reason...
Torque For Installation of Dexter Electric Trailer Brake Kit 23-180-181
What are the torque specs for the brake backing plate? | According to Dexter, the torque should be between 25-50 ft. lbs. when installing the # 23-180-181. If you don't already have mounting hardware you'll need the Mounting Bolts and Hardware...
What Ramps Are Good For Loading A Car Onto A Flat Bed Truck
Will need these ramps to load small car on the back of the flatbed truck. It seems like they will be the option for the truck, but you all are the experts. Not sure if it will but it is by far the first one we have seen that has capture our...
How to Connect a Tekonsha Prodigy P3 Brake Controller to a 2005 GMC C4500 Topkick
I have a Tekonsha P3 brake controller I removed from my other truck. I now have a 2005 GMC C4500 Topkick I would like to install it in. Do they make a wiring harness for this truck? | You can install your Tekonsha Prodigy P3 # 90195 in your...
Parts Needed to Wire in Brake Controller and 7-Way to 2000 C6500
I recently purchased a 2000 C 6500 from U Haul. I used one of their car hauler trailers for my move, the trailer is a electric over hydraulic system. What do You recommend to so I can tow a car hauler trailer with just one brake axle and a 7...
Baby Moon Cover for Dexstar Conventional Trailer Wheel AM20514
Do you sale babymoon or any other hub caps that fit your 15 6 lug conventional dexter wheels. | Yes we have the baby moon covers # AM981306 that fits the 15 inch conventional trailer wheels part # AM20514 that you referenced. |
Dimensions of the SumoSpring Helper Spring for a 2009 GMC Topkick
the summo spring for a 2009 topkick, 2 wheel drive front axle. what is the length of this bump stop. | The bump stop is 5" long on the SumoSprings Solo Custom Helper Springs - Front Axle item # SSF-281-47. The bracket is 7/8". This is a confirmed...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
Tire Chains for an ATV with 25x10x12 Tires
Are cable chains available for Kubota SUV... 25X10.00-12NHS | While we do not have cable chains for ATV 25x10x12 tires, we do have low-carbon steel V-bar chains for them. They are the Titan Chain ATV Snow Tire Chains - Ladder Pattern, part...
Hitch for 2005 GMC C5500 Topkick with Tommy Lift
I have a 05 GMC C5500 Topkick snap on truck Would this hitch work on here with a Tommy lift Thank you | The # TLF1003-30 hitch you're asking about is designed for a 1999-2016 Ford F350, F450 or F550 chassis/cab and wouldn't fit your Topkick. For...
What Brake Controller and Module for 1997 GMC Topkick 6500 Towing 10 Ton Trailer
I have a 97 gmc 6500 and I need to know what you recommend to install brake controls for a dual wheel tandem trailer with a 6 pin factory plug.what controller,cable,circuit breakers, wiring info the trailer is rated for 10 tons. | Depending...
Hard Wire Brake Controller Installation in 2002 GMC Topkick
Need to hard wire a controller in a Topkick with Hydraulic brakes any insight would be help full? Most of Power ,ground and feed to the trailer is not that big of a deal the control wire from the brake controller to the brake switch is where...
Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails
Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...
Gooseneck Hitch Recommendation for 1996 GMC Topkick Lo-Pro with 12Ft Bed
I have a 1996 GMC topkick lo-pro with a 12foot bed and would like to set it up to tow a goose neck trailer, thank you for any and all assistance | According to my contact at Curt, you could use the Gooseneck Flat Plate, # C65500, and mount it...
Recommended Trailer Hitch Receiver For A 1974 Ford Ranchero
Hi, Im interested in a tow hitch for a 1974 Ford Ranchero. Can you tell me if you make one and what the product number is? Many thanks, Lock | Unfortunately we do not have a trailer hitch confirmed to fit a 1974 Ford Ranchero so you would have...
Dimensions of Reese Low-Profile 5th Wheel Trailer Hitch RP30054
Could I get the length and width of the Reese low profile 30,000 lbs. 5th wheel. The reason I need the length and width is I am building a bed for my Top kick. I am going to install this 5th wheel in the bed. Thank you | According to my contact...
Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR
I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...
Best Compatible ATV Winch and Mounting Plate for a 2012 Kubota 900XT RTV
What model winch would you recommend for a Kubota 2012 900XT RTV, do I need to purchase a separate mounting plate? This would only be used occasionally. | Yes, you will need to purchase a separate mounting plate specifically designed for your...
Filter Your Search
Contact and Help