Choosing the Correct Rise/Drop for Lock N Roll Articulating Hitch
I purchased this hitch: 336VS503515. Does it come in pieces or as one solid piece ready to attach to my new vehicle? I currently have a 4” rise/ on my truck, but I am trading that truck in for a class B camper van Winnebago Solis Pocket 36A,...
Attaching the Lock N Roll Articulating Coupler to Tongue of Trailer where Bolt Holes Don't Line Up
Question. So I need some suggestions. I want to switch my trailer to the Lock-N-Roll. I have both parts, however, the trailer side part is the 2 channel trailer side. 336TS528 so here is the issue, my trailer existing trailer side ball recieve...
Is the Ark Off-Road Coupler Better than The Lock N Roll Coupler?
I am trying to decide between the Ark coupler and the Lock n Roll. I have a 3500# wet camper being pulled by a Tacoma. I like the use of a ball for versatility as in the Ark, but am concerned with the 5000# strength rating off road. What...
Converting Pintle Setup of M416 Stevens Military Trailer to Lock N Roll Articulating Coupler
I have a Stevens m416 trailer to pull with my 14 jk and want to switch from pintle to an articulating hitch system and I also want to extend the tung. What do I need to buy to make that happen? | Since your Stevens M416 has an A-frame design...
Can Lock N Roll Articulating Hitch be Used in Rise Position
Can this be flipped upside down to provide a rise? Or is this really only for dropping the trailer lower than the hitch receiver? | The Lock N Roll Articulating Hitch w/ 5-Position Channel # 336VS503515 that you referenced can be used in the...
Replacement Coupler for Crux Expedition Off-RoadTrailer
I have a crux expedition trailer that came with a bolt on poly block coupler and I want to swap to a 2 ball coupler. Is there a way to do this? Ive search for couplers and nothing seems to fit the A-Frame, so possibly a 2inch ball with a straight...
How To Choose Correct Lock N Roll Articulating Trailer Hitch
I am trying to figure out what /rise Lock N Roll hitch I need. I have a 2019 Tacoma stock wheels and measure the hitch height at 17.5. The trailer we are getting has a hitch height of 21 3.5 difference. I see there is on eTrailer, there is are...
Recommended Articulating Coupler and Hitch for Taking 12 Foot Teardrop Camper Off Road
Hello, I am want to buy a articulating hitch and am not sure which is my better option. I have a Colorado and a 12 ft tear I take off road all the time and am looking for a better hitch system . Can you tell which of your hitches you would suggest...
Which Lock N Roll Coupler Fits On a 2005 Strarcraft RT10 Pop Up Camper?
Will this coupler fit on a 2005 Starcraft RT10? Seems to me like the latch and brackets for support poles would be an issue. Pictures attached. Is there another articulating coupler system that would work? | Based on the images you sent in it...
How do You Connect Lock N Roll Trailer Coupler 336TS510
I just purchase the lock n roll hitch for my vehicle, trailer, and the locking hitch pins. I know the 2pins are for, one securing the 2 couplers together and the other one is securing the vehicle coupler to the vehicle. I was curious how do...
Could Bulldog and Curt Channel Coupler Fit in Lock N Roll Channel
Would this channel bracket be compatible with other bolt on couplers such as the Bulldog Collar-Lok Coupler Item # BD028585, or Curt Channel-Mount Coupler Item # C25328? | The channel of the # 336TS505 is wide enough to accommodate the # BD028585...
Can Lock N Roll Coupler Be Used for Flat Towing a 1992 Jeep YJ Behind a Motorhome
How will the Lock and Roll system do in a flat tow situation with a 92 yj jeep as the towed vehicle in lieu of a trailer at highway speeds? | That's a big no when it comes to using the Lock N Roll Articulating Channel Tongue Trailer Coupler...
Which BOLT Lock Can be Used with 2016 Toyota Tacoma
Two questions. 1. I have a 2016 Toyota tacoma. It has a push button start, and does not have an ignition key. It does however have a key for the tailgate. Will the tailgate key work with your hitch pin locks? 2. I also will be purchasing a Lock...
Will the Lock N Roll Articulating Coupler Fit a Karvana Trailer
Hello was just trying to see if you could possibly verify if part#336TS504, weld-on A-frame would fit on a 5x8 karavan utility trailer. I do have pictures with measurements off the trailer if need be that I could send, thank you. | The Lock...
Will The Lock N Roll Articulating Coupler # 336TS504 Fit a 2021 Forest River No Boundaries 10.6?
Hello, will the 336ts504 fit a 2021 Forest River No Boundaries 10.6? | Yes, the Lock N Roll Articulating Coupler # 336TS504 will fit as a replacement for the standard coupler on your 2021 Forest River No Boundaries 10.6. You will of course also...
Do They Make a 1-1/4" Adjustable Ball Mount?
Is there an adjustable mount for 1 1/4 shank? | The Lock N Roll 3-Position Adjustable Channel Bracket for 1-1/4" Hitch Receivers # 336VS507 will allow you to use a Replacement 2" and 2-5/16" Dual-Sided Hitch Ball # C45912. This will give you...
Bolt On Off-Road Trailer Couplers Availability
Do you carry the ARK articulating offroad hitch that bolts to the tongue of the trailer ORXOF50? I saw the ARK articulating hitch that s into a 2 weld-on mount on your website Item # AR44FR, which appears the same as the ORXO50 with exception...
Can a Swivel Type Pintle Hook Be Used with 2 Hitch
Do you have an adjustable height mounting bracket this swivel pintle hook would attach to that includes a 2inch draw bar for use with a Class III hitch? Im looking at buying a military surplus trailer that has a pintle ring type hitch and...
Recommended Trailer Locks To Secure Trailer With Lock N Roll Coupler
Hi, What type of trailer side lock do you recommend for a lock and roll hitch? We’re buying a camping gear hauler that has a lock and roll hitch and would like to secure it when we leave it at a campsite for the day. Could you also recommend...
Availability of Adjustable Ball Mount Like MT70067 With Higher Weight Capacity
hi, im looking for something exactly like this: MaxxTow Adjustable-Height Ball Mount - 2inch Hitch - 10inch , 8inch Rise - 5,000 lbs but a little stronger. like a 10,000 lbs range? i do not need a ball, im using a poly-hitch so i need an...
Recommended Lock N Roll Articulating Hitch For Scamp Trailer
Hi: My 13 foot Scamp Trailer recently flipped onto its side behind my 78 Landcruiser. It isnt pretty and Im currently learning a little about fiberglass repairs! My question is, since the Scamp has a ball hitch receiver, will I have to have...
How to Level Trailer With Lock N Roll Articulating Trailer Coupler
If I currently use a 2” for a standard ball would the be identical for lock n roll or could it be different? Looking to convert a trailer | I'm assuming you're speaking of a 2 inch drop on the ball mount you're currently using, is that correct? If...
Can I Back Up Normally When Using a Lock N Roll Trailer Coupler
How is the control of the trailer when youre in reverse? | The 360 degree rotation of the Lock N Roll Articulating Trailer Coupler # 336VS511, along with the left to right and up and down articulation allows fantastic maneuverability, especially...
Does Lock N Roll Articulating Hitch part # 336VS511 Reduce Weight Capacity
Does an articulating hitch like Lock N Load effect the weight carrying capacity of a hitch or is it the same as a ball hitch? I have a 6600 lb trailer Im buying and according to the light pickup truck manufacturers 5000 lb load carrying limit...
Filter Your Search
Contact and Help