!Designer Camper  x   >   MAXXAIR  x   >  

Hello, Not sure if it is the vent or just the switch/controller that is bad. The fan and the lid opens and turns on even if it is unplugged from the switch. The only way I can turn it off is to turn off battery disconnect. But then later...

Hi there, Question about the MaxxFan Deluxe. Shocker, Aye? - Haha. I would like to get the fan with the transparent lit, not the darker black tint or white. I see it available sparingly on the internet. Mostly available overseas.. Is there...

Hello. Can the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke Item # MA00-06401K, be installed on a wall of an inclosed trailer? or is it only suitable for roof installation? | According to the manufacturer the MaxxFan Deluxe...

We need the metal clips that come on the Replacement Roof Flange Assembly for MaxxAir Maxxfan Deluxe RV Roof Vent. Do you sell these separately? | When it comes to replacing the roof flange assembly on your trailer we sell The Replacement Roof...

I have a MaxxAir fan model number 4751KS, I would like to put Maxx Air roof vent on it. I tried the regular Maxx Air roof vent cover and it doesnt seem to fit correct. Could you please help with ing the correct cover. Thanks | The MaxxAir FanMate...

when turning the black knob, the vent housing will not open, like a piece is stripped out. are there replaceable parts for the opening knob operation? | We do have the Replacement Locking Knob Shaft for MaxxAir MaxxFan RV Roof Vents, # MA10-21232KSHAFT....

Can this be installed on a mini van | You could technically install the MaxxFan Deluxe Roof Vent # MA00-07500K in the roof of your mini van.That being said, the main issue is going to be the mini van's roof thickness. Since the roofs on vehicles...

I need a replacement motor for my maxxfan deluxe 7500k, do you have what I need? | Yes we do! For your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K, you'll want to use the: -Replacement 12-Volt Variable Speed Fan...

How heavy is this vent? Thanks! | The MaxxAir MaxxFan Mini Roof Vent with 12V Fan # MA00-04401M weighs just 10 lbs. I have added a link below to a video review for you to check out as well. |

I would like to install a Fan-Tastic Fan but do not have any available roof space. I have an Aliner Ascape trailer and the air conditioner and solar panels are taking all available roof space. Is there a Fan-Tastic fan model available that can...

I need a screen for my 2005 Alpenlite powered bathroom roof vent. The part number I was able to find with a picture of the screen I need is V771232-C. | I recommend installing a MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066 on...

What are the dimensions of the flange? Will this work with a Maxx Fan Deluxe 7500K? Thanks | According to Airexcel, the manufacturer of MaxxFan, their # MA49FR replacement roof flange assembly is compatible with their # MA00-07500K 7500K MaxxFan...

Did you measure the current draw to be 2A or find the spec somewhere? I ask because I have found a person who shows measuring the current with an inline multimeter at 0.7A? | The power draw of the MaxxFan Dome Plus Roof Vent part # MA00-03810B...

I’m looking for a wall control for a Fantastic Vent Model 5250. | I am sorry but there are no replacement control panels or remotes available for the Fantastic Vent Model 5250. That model of vent is obsolete and they aren't making replacement...

I’m installing a 7500K fan and would like to know what size of fuse to use a n the circuit? I’m talking about the 12 volt dc. Thank you | In general you do not need to install inline fuses with roof vents like the MaxxFan Deluxe Roof Vent w/...

I have the maxxair vent mentioned above. when you go to close it it keeps turning even after its closed making a popping sound and have to stop it by hand. sound like the power lift mechanism? | The MaxxAir MaxxFan Plus Roof Vent # MA00-04500K...

Hi I am interested to change my fantasticfan for the maxxair Need to know what is the the foot print on the roof since I have my Ac that is pretty close? I know the fan hole is the same 14x14 but when it’s close wath is size MaxxAir MA00-07500K....

DO YOU SIMPLY INSTALL THIS UNIT AND IT KNOWS WHERE OPEN AND SHUT ARE. iS THERE ANY TUNING TO BE DONE. I SUPPOSE THE CONTROLS KNOW WHEN THE DOOR IS OPEN OR CLOSED RIGHT? | When installing the # MA10-20281K-1AF replacement operator, you might...

Will this operator mechanism work on my Maxxfan model number 7001k? It looks slightly different than the defective part I removed. Thanks! | Thanks for the pictures and model info. From that MaxxAir has assured us that the correct replacement...

The model number on my rig’s Coleman Mach AC is 6727-731. I need to replace the exterior shroud as it’s about to fly off only the rear two bolts holding it on. Do you carry replacement shrouds to fit this and the bolts needed? I’ve tried to...

hi I have a 2011 Continental cargo trailer made be forest river trying to figure out which vent cover is the correct one also looking for the handle to crank up the vent and the correct lisence plate light thanks | Most likely we have what...

My control is on the wall. When I try to open the vent, the vent pops up a little bit and then falls back down. The fan comes on fine. | Sounds like there's an issue with the linkage that raises and lowers the lid of the MaxxFan Plus Roof...

My fan will not come on and the lid will not open. I do not have a remote but a panel on the wall. I can open it manually but it still will not come on. Any suggestions? | If your roof vent, like the MaxxFan Plus # MA00-04500K, is supposed to...

Is MA8335A5261 the correct replacement shroud for model 7333C886? What is the difference between this and MA00-325001? | The part number you mentioned from Coleman indicates you have a Coleman Mach RV AC unit which the part # MA00-325001 is...