2018 Tiffin Allegro Motorhome RV Power Cord

Hey Bud. It doesn't say you can't put the Watchdog Power Center Surge Protector and Voltage Booster item #HU74ZR on its back but you are going to block some of the ventilation. The unit does warm up and it will shut off if the internal…

Yes Cheryl, with the #HU74ZR 50A you’ll see volts and amps for each leg (L1 and L2) individually, both on the display screen and in the app. That’s especially helpful if one leg is sagging under load while the other looks fine. The booster will step…

Kendra, congrats on the new Reflection! Those are super nice. Since your RV has 50 amp service, you’ll want the Watchdog Power Center Surge Protector #HU74ZR. The Watchdog Surge Protector #HU72VR is 30 amp and won’t cover both legs of your panel, and…

Hey David, do you mean to cut the plug off of the Watchdog Power Center Surge Protector and Voltage Booster #HU74ZR and then wire it to your RV outlet? If so, it would be just a matter of cutting and stripping wires to pull this off.

Hey Jason, thanks for reaching out! Yes, you can use the Weigh Safe Flap Jack Folding RV Stabilizing Blocks #WS78ER for holding your slide-in camper up with the HappiJac system. An alternative is the Lift Extenders Kit #LC182495 which offer a 6"…

I recommend upgrading to the SmartPlug RV Power Cord and Black Inlet part #SM69FR which will cut down on the heat being transferred to the plug. The old styles typically have a pretty loose fit which will create heat build and in extreme cases, can…

Hey Bb, we do have the Curt weight distribution shank part #17120 which can do a drop of up to 6-1/8 inches which would be perfect for either the Fastway kit you mentioned or the Curt system part #C95MJ you referenced. Which system do you have?

Hey Paul, the thermostat that comes with the Furrion Chill Cube part #FR69TD does have the ability to control a furnace so you could wire you current furnace thermostat controls to it. Or if you have a thermostat you are already using for the furnace…

Hey Richard, the bag that comes with the Andersen Camper Leveler part #AN68VR measures 15 inch x 8.75 inch x 6 inch. Are you wanting to repurpose the bag?

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the manufacturer…

Hey Tom, we have 50 amp to 15 amp pigtail adapters like the part #A10-1550VP but we do not have anything from Smartplug.