bing tracking image
  1. Vehicle Suspension
  2. Firestone
  3. Air Springs
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Heavy Duty
THIS ITEM IS NOT A FIT FOR
2011 Lexus RX 350
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Firestone

Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle

Part Number: F83VV
In Stock
$445.68
Retail:$739.00
You Save: $293.32
Vehicle Suspension
Not Confirmed to Fit

2011 Lexus RX 350

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride. Great Prices for the best vehicle suspension from Firestone. Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle part number F83VV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3272)
  • Q & A (0)
  • Photos

Firestone Vehicle Suspension - F83VV

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 5,000-lb Load Support: Keeps your truck level and stable when hauling or towing heavy loads.
  • Better Steering and Braking: Prevents rear sag so handling and headlight aim stay consistent.
  • Adjustable Air Pressure (5–100 psi): Fine-tune support for heavy loads or daily driving comfort.
  • Smooth, Controlled Ride: Double-convoluted rubber springs absorb road shock and prevent bottoming out.
  • Durable, No-Drill Setup: Reinforced rubber with corrosion-resistant plates installs using custom brackets.
Made in USA

Features to know about

Stay Level and Confident Under Load: 5,000-lb Rear Axle Support

Heavy trailers, campers, and bed loads can make the rear of your truck sag and throw off steering and braking. The Firestone Ride-Rite Air Helper Springs add up to 5,000 lbs of load-leveling capacity to keep things balanced. Mounted between the frame and rear suspension, they help distribute weight evenly, improve steering control, and maintain level headlight aim so you stay stable even when the truck is working hard.

Dial In Your Ride for Every Trip: Adjustable Air Pressure from 5 to 100 psi

Load sizes change from day to day, and these air springs adjust right along with them. Each side can be inflated separately using manual valves, letting you fine-tune pressure from 5 psi up to 100 psi to handle off-center or uneven loads. Add air when towing or hauling a heavy payload to level things out, then drop it down when running empty for a smoother, more comfortable ride.

Firestone Ride-Rite air line installation showing tubing routed from air springs to rear bumper for easy manual inflation access

Smooth Out the Rough Stuff: Double-Convoluted Air Spring Design

Rough roads and heavy bumps don’t have to mean harsh jolts. The Ride-Rite’s double-convoluted rubber construction with a braided wire girdle cushions contact between the axle and frame to prevent bottoming out. Four layers of reinforced rubber absorb road shock and steady the truck over uneven pavement or washboard surfaces. The design also helps reduce wear on tires and suspension components by keeping everything working within its proper range.

Built Strong and Ready to Install: Heavy-Duty Brackets and Corrosion-Resistant Hardware

Each kit comes complete with custom brackets, hardware, air line tubing, and separate inflation valves for manual setup. The corrosion-resistant metal end plates are sealed with a rolled crimp that locks the bags firmly in place for long-term durability. Once mounted, no drilling is required—just a solid fit that adds serious rear suspension support without complicating your setup.

Specs

Weight and Capacity

  • Load-leveling capacity: 5,000 lbs

Performance and Operation

  • Adjustable air pressure: 5 psi to 100 psi

Warranty

  • Air springs: Limited lifetime warranty
  • Hardware: 2-Year limited warranty

Note

The construction material of the fittings may vary.

Firestone Ride-Rite double-convoluted air spring assembly with rubber bellows, metal end plates, and reinforced construction


W217602599 Firestone Ride Rite Air Bags - Suspension Kit - Double Convoluted - Rear Axle

2599



This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.6

3272 reviews
5 Stars
(2608)
4 Stars
(411)
3 Stars
(96)
2 Stars
(56)
1 Star
(101)
Review Sort Icon
by:
A great product, works well. Had to remount an electrical plug with zip ties
by:
2025 Toyota Tacoma
I installed in an afternoon. Drivers side was harder to install but I used Zip ties to help keep compressed while I installed it .i am Happy So Far. 10 psi to Start. A little pressure makes a Big Difference
by:
2026 Toyota Tacoma
etrailer is very easy to work with. Product shipped quickly and got to my house within a few days. Installation instructions were very easy to follow and the install video was very well-made. The only negative I could find was that there was no packing along with the product inside the box, which did cause some wear and tear on the parts inside, but not enough to cause damage.
by:
2026 Toyota Tacoma
I carry heavy and tow about 3,000 pounds when I go camping. These bags make all the difference! I have them set at 28 pounds, but I may be able to go lower.

The install was easy, just follow the instructions as they are well written.

I also bought the T to connect both bags to a single fill source. However. I may revert back to having the ability raise and lower each side individually. This will allow me to level the truck left to right for my roof top tent.

Common tools are all that is needed. The only non-standard tool is a 24mm socket.

One thing I would add to the installation instructions is when you are placing the bags in and out for the markings. It is helpful to compress the bags by hand (like you’re holding a large cheeseburger with both hands).
by:
Excellent ride and makes it easy to distribute weight. No install problems.
by:
2024 Toyota Tacoma
These will not fit the 2025 Tacoma Trailhunter! The brackets interfere with the brake sensors. Saying these will fit all Tacomas is absurd given they have different suspensions. There's nothing referenced in the literature about these sensors. What a waste of 3.5 hours at the shop, now I have to re-install everything and wait for
Firestone techs. Etrailer doesn't seem to be understanding that this trim is totally different.
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/28/2025

Sorry about that, John. We get our fitment recommendations directly from Firestone for these and the only exception we were aware of was they will not fit 2 wheel drive models (which is what Firestone is still showing on their website). I do also have to point out that two pieces of the braking system are referenced on page 7 of Firestone's instructions for this kit. Is this wat you are referring to? Or is it something else?

by:
by:
by:
2026 Toyota Tacoma
by:
by:
2015 GMC Sierra 3500
excellent product, very easy (uncomplicated) install. anyone who is somewhat mechanically inclined can install themselves. It took me about 3.5 hours by myself with simple tools and a jack on my garage floor. Hardest part was me getting up and down from the creeper.
On my truck, (2015 GMC) i had to remove Ebrake cable brackets on both sides and reroute, not a big deal. also, did not find it necessary to remove spare tire heat shield, worked around it just fine. Routed my schrader valves through the plate screw holders for easy access.
Jim profile picture

Jim

5/13/2026

Still happy with this install, bags help tremendously over bridge joints hauling my 5th wheel. not sure how these compare to Timbren setup, but i would guess better based on being able to adjust pressure. way more stable over bridges and bends in road.

by:
This installation took twice as long as it should have! The top plate had to be modified to clear the leaf spring U bolts and shock absorber bracket.
The Jounce doesn’t allow the installation of the 3/8@ bolts close the leaf spring that holds the brackets together. I’m not sure what to do with this now. I saw in other reviews where other people had similar issues. Not sure if it’s the universal bracket design vs having slotted holes like your video.
Any help would be appreciated.
Also both valve inserts had to be replaced!
Lazer S. profile picture
Etrailer Expert

Lazer S.

6/16/2026

I will be contacting Firestone about this, but what is the year, make, model, and version of the vehicle you are trying to install this on?

by:
Excellent customer service! Very knowledge staff and basically have anything you need!
I just unpacked my box filled with air bags for my truck! Great video showing how to install made it a breeze!!
Christopher H. profile picture
Etrailer Expert

Christopher H.

8/4/2026

Thanks for the kind words Robert! Also thanks for including the photo in your review. Glad the video was helpful!

Robert H. profile picture

Robert H.

8/4/2026

@ChristopherH You are so welcome. Great service deserves to be recognized ??
Claire H. profile picture
Etrailer Expert

Claire H.

8/4/2026

@RobertH
Christopher H. profile picture
Etrailer Expert

Christopher H.

8/4/2026

@RobertH We do what we can. Let us know if you need anything else!
by:
2025 GMC Sierra 2500
This the 3rd truck I've used and installed myself of the Firestone 5,000lb rated airbags on, and not one has ever failed on me. I used them on a 2007.5 Chevy LMM 2500 LT Silverado, a 2020 Chevy 2500 LTZ Silverado, and yesterday I put them on my 2025 GMC 2500 Denali. I did pair my new bags with an Airlift wireless compressor, which is an awesome addition to the bags. I like the fact that etrailer did a comparison video on the Firestone and AirLift bags, and they found the Firestone bags are of better quality and can support the weight of the axle if you lift the truck off the ground by the frame. If you have never installed these bags, you do not have to lift the truck off the ground or remove your rear tires. If you're like me, and do not have access to a lift, I suggest removing your spare tire, which will give you more seating area, and you will not bonk your head into it. Two thumbs up on this kit
Robert profile picture

Robert

1/17/2026

After 1 year of use, my Firestone airbags never let me down. Working perfectly. This is the 3rd trucks Ive run Firestone 5000 lbs. rated bags on with no issues.

by:
I purchased this Firestone Air suspension and installed it myself on my 2017 Toyota Tacoma Access Cab 4x4. Not having a lift, I had to use a creeper and tarps under and beside the truck to do the installation. Installation was pretty straight forward after viewing the video from etrailer a few times and using the provided diagrams. You will need good 3/4" drive hand tools for the installation. An electric or air impact wrench and ratchet also speeds things up. I then installed a mini onboard compressor with remote control for in cab or outside operation. The system has never leaked air but if it did, any time the vehicle is started, the compressor will refill the system. I keep 10 lbs. air pressure in it and raise it to 20 when I haul my dirt bike on my hitch carrier and it compensates nicely and keeps the vehicle level. All good so far.
Alec profile picture

Alec

9/29/2025

Still working great as it should and doesnt leak air. The remote controller is really convenient and can be operated from inside or outside the truck. Definitely worth all the work. The shield I fabricated for the compressor keeps road grit etc. Out of the air intake of the compressor which should be a huge help for the life of the system. Love it.

by:
toyota Tacoma
Definitely help level the truck back out with the camper, and bed full of firewood cooler. Installed very easily, but it did have a clearance issue with a bracket almost touching the gas tank skid plate. Some grinding down and krylon flat black paint fixed that issue. But the little tacoma still needs heavier shocks to slow the travel down when hitting bumps. Especially bridge joints back to blacktop. In all worth the money, just need to set aside more money for better rear shocks to accommodate. May eventually change them to the cradles to keep flex availability. As well as less issues when putting the truck on a lift for service.
by:
2023 Chevrolet Silverado 2500
Installation was really easy except for the lower brackets that attach to a lip of metal. There was another piece of metal on the axle that got in the way but i pried and then hammered the bracket into place, squeezing it in. If I didn’t I’d still be able to get the bolt through but I bet as I tightened it down it would move the base plate and wouldn’t be lined up as well. No air is leaking so far. I didn’t buy the compressor so I might screw on some Bluetooth tire pressure monitors so I’ll get notified if pressures drop below 5psi. I have a 2023 Chevy 2500 and surprisingly with 15psi and no load in the bed it rides much better! Doesn’t hop all over the place
Mark profile picture

Mark

8/20/2025

I ended up adding an airlift compressor which was super easy to install and everything works great! I got tired of checking pressures, the air compressor monitors psi and kicks on if needed. I would buy and install these things again if I ever end up getting a new truck. Works great when towing my 12,000 pound bumper pull camper

by:
Just what my Tundra needed to help balance load of bed and trailer.
etrailer.com and the products they offer are 100% in my opinion.
Thank You for your excellent service and follow up.
Kate F. profile picture
Etrailer Expert

Kate F.

9/17/2025

Glad we had the right fit for your set-up Gary! What an awesome picture too! What has been your favorite trip you have been on this year? Where did you go, what did you see?

by:
2015 toyota Tacoma
I just installed them and put them to work immediately and I am impressed so far! Installation was pretty simple, and they fit great even with an Old Man Emu 3" lift (7 leaf spring stack). It only took about 15 psi to level up the Tacoma even with 1000 Lbs of feed and a steel high rack on it and they handled that load over 50 miles of some very rough west Texas terrain. They seem to be very well made and heavy duty. Time will tell if they hold up but again, I am very impressed thus far!
by:
2020 Chevrolet Silverado 3500
I’d really love to give these a 5 star as they massively improved the ride and porpoising of my truck with a fairly heavy truck back camper. We were shorted one bit of hardware in the kit that caused a 1 hour RT drive to the hardware store for a stupid bolt. One of the hex head flange/wedge bolts for the upper mount was missing . Simple ‘miss’ by someone but was annoying . That aside everything g was great.. instructions were clear and helpful… I’d give them a 2 of 5 for difficulty installing.. any weekend mechanic can do this. The truck rides better and is safer now so thumbs up all around except for Mr Bolt pack loader!
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

6/17/2025

Thanks for being honest with your review, Lee. It really is a bummer when a part, even as small as a nut, is missing causing a delay with the install. However, I'm glad that you were able to get everything installed and that the ride is better and safer now. When's the next camping trip?

by:
It took a little more time to install than I thought, but then again I’m 72 years old and a perfectionist.
Seriously though, they installed per the instructions and the only modification I had to make was to the passenger side brake line, which had to be removed from its holder and gently bent in order to obtain the recommended clearance.
by:
2019 Chevrolet Silverado 2500
Great product! Quick shipping, good install instructions, easy to use. Installed these on my 2500HD. Next day had 2,500# of shingles loaded in the truck bed. Truck still sat level, and handled great! I highly recommend for anyone moving weight. Difficulty to install from 1-10, 1 being easiest these are about a 3. I would say around the same level as changing a set of brake pads.
by:
The installation was pretty straightforward, and was managed at campsite with basic tools. It is filled with Milwaukee portable air inflator and has been keeping air pressure set at. We have had good use of it to level truck after loading 5th wheel. I elected to not join both lines together so I can keep individual air pressure in case one had leak but has been fine, I might join them with optional part etrailer offered.
After 1 year and 8,000 miles has been great purchase. All bolt on, no holes to drill, I even placed fill valves in license plate to conceal installation.
Alex at etrailer was excellent as helping us find the correct kit and shipping promptly with great communication and follow up.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/21/2025

Your set up looks great, Mike! Where are you planning on traveling to this year?

Mike profile picture

Mike

4/23/2025

@GwendolynY We have been to Florida, Tennessee and finally CT so far but we are undecided ne t trip so far, waiting for trucker & rv road Atlas before planning next trip.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/23/2025

@Mike I haven't had someone mention an Atlas in a long time! Reminded me of my first road trip with one of my sisters and using a combination of those and print out directions from old reliable MapQuest. Was the only way to know where you were going then.
by:
Really quite easy installation. Honestly, the hardest part was routing the air line. (that coiled up hose!) I ended up covering the lines with cable wrapping to protect them from any rubbing or scuffing. I also don't have a compatable hitch for the mount, and didn't want to mount them through my bumper in the license plate area because I know I would step on them at some point in time. Product had all the correct parts, high quality, and super happy with it. I wish I had gotten them sooner.
Brooke M. profile picture
Etrailer Expert

Brooke M.

6/6/2025

Install looks awesome - I think the wrapping of the line was a great idea too! Do you work on vehicles a lot?

Al profile picture

Al

6/9/2025

@BrookeM I do, mostly my own, not a professional, but have everything like tire changing and balancing machine, compressor, etc. Didn't need much to do this job which was nice though. just some wrenches, oscilating tool (For the factory bumpers), razor knife, and a drill with an assist from my creeper (To lay on, not my weird neighbor).
Brooke M. profile picture
Etrailer Expert

Brooke M.

6/9/2025

@Al sounds like you basically have a shop all to yourself! And haha, the creeper comment made me laugh! Thanks for clarifying LOL
by:
installed the Firestone Ride Rite air helper springs with the on board pump and they work great!
25
3272
true
Show More Reviews

See what our Experts say about this Firestone Vehicle Suspension

  • What Firestone Air Bags do I Need for My 2024 Toyota Tacoma Trailhunter, What Spacers for Stock Lift
    Hello Jared, Sounds like you’ve got a great setup with your 2024 Tacoma Trailhunter and the Go Fast Camper. That camper weight, around 330 pounds, is definitely enough to cause about an inch of sag in the back, so it makes perfect sense that you’d want to level things out. You’re absolutely on the right track looking into the Firestone Ride-Rite air bags. The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F83VV are the correct fit for your Trailhunter. Even though...
    view full answer...
  • Does Firestone Ride Rite Kit F83VV Fit 2025 Toyota Tacoma
    Hey Jeff, I checked with Firestone and the only version of the 2025 Toyota Tacoma that the part # F83VV doesn't fit is the 2 wheel drive models. The SR5 can be either 4wd or 2wd so you would need to verify which configuration you have to know if these will fit or not.
    view full answer...
  • Best Suspension Enhancement Option For 2024 Toyota Tacoma Trailhunter
    Hello Tim, thanks for reaching out. The best option for this will be an air bag kit, the Firestone Ride-Rite Air Helper Springs # F83VV. This will allow you to get the support you need to keep your truck level when you are loaded down. Then you can reduce the PSI when unloaded to keep the factory ride from getting too rough. If your Trailhunter is lifted, the air bags can still be compatible, but you may need a spacer to compensate for the lift. Based on the specs I found online, the...
    view full answer...
  • Air Bags and Cradles for 2024 Toyota Tacoma
    Hey Connor! Firestone doesn't offer cradles for the Ride-Rite Air Springs # F83VV, and I wouldn't recommend adding aftermarket cradles since Firestone hasn't approved them for this kit. For your 2024 Toyota Tacoma, I recommend the Air Lift LoadLifter 5000 # AL45DQ instead. You can pair these with the Air Lift Air Helper Spring Cradles # AL59DQ, which allow the suspension to fully extend when you're off-roading without pulling on the air bags. Installation is a little different since the...
    view full answer...
  • Air Bag Suspension Kit Recommendation for 2025 Toyota Tacoma 4WD
    Hey Red, we only have air bag kits like the Firestone Ride Rite part # F83VV for your 2025 Toyota Tacoma. We don't have anything that would fit into a rear coil for your truck but this kit is mostly black so it wouldn't be super obvious.
    view full answer...
  • Will the Firestone Ride Rite Air Helper Springs Fit a 2025 Toyota Tacoma TRD Pro?
    They sure will Carlos and welcome back. The Firestone Ride-Rite Air Helper Springs item # F83VV will indeed fit your 4WD 2025 Toyota Tacoma TRD Pro. This kit has custom fit brackets that will bolt the air springs to your Tacoma without drilling. The Firestone item # F83VV have a 5,000 lbs capacity that will level out the rear end of your Tacoma when you are towing a trailer or hauling a heavy load in the bed. I recommend adding the Firestone Air Command item # F2610 to your truck. This...
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Leah S
Edited by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Andy C
Installed by:
Andy C
Employee Dawn Z
Written by:
Dawn Z
Employee Ethan H
Video Edited:
Ethan H
Employee Jesse B
Test Fit:
Jesse B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.