RV Exterior Lights Specs:
Features:
4" x 2-1/2" x 1-5/16". Compact LED light illuminates the area at the base of steps or ramps. Durable aluminum hosuing. Surface mount. 2-Wire design. ADA compliant. Perfect for buses, RVs, enclosed trailers, or boats.
More Information >RV Interior Lights Specs:
Work Lights Specs:
Features:
5-3/4" x 1-9/16" Oval. Low-profile LED trailer light illuminates an area with bright light. Miro-Flex design provides increased light output with a contemporary design. Surface mounts to trailer - hardware not included. 2-Wire design.
More Information >Videos
for RV Interior Lights
Help Articles
for RV Interior Lights
Expert Answers
for RV Interior Lights
I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they aren't…
view full answer...From what I could find out about your current circuit board, the Atwood Replacement Control Panel #AT91367 will be a direct replacement.
view full answer...The High Pointe microwave part #HP49ZR would work great as a replacement for what you have now as it's the correct dimensions and also works great. We also have it in black with the part #HP99ZR.
view full answer...While we do not carry the L9100 light you are asking about, or replacement parts for it, we do have similar replacement options such as the 2" Recessed Halogen Puck Light with Frosted Glass, #277-000125 and the LED RV Puck…
view full answer...For 12v Vanity lighting we only offer the following products which are all satin nickel: Item #277-000324, Item #277-000446, Item #277-000322, and Item #277-000429. I've attached a link to the RV lighting page as well.
view full answer...Yes, the Reese Goose Box #RP94716-61301 that you referenced will work perfectly to replace the existing MorRyde RPB72-1716 pin box on your trailer. Both units feature the standard Lippert 1716 model pin box bolt pattern. This Goose Box will allow…
view full answer...You have a good eye as the black tubing sections are plastic for the Camco Gen-Turi RV Generator Exhaust System #CAM44461. It's just the curved pipe section that is made out of stainless steel.
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said…
view full answer...By other dimensions I assume you are referencing the wheel bolt pattern for your 15 inch trailer wheel, and I have added a link below to a help article on how to find the correct bolt pattern. For a 15 inch wheel you likely have either a 5 on…
view full answer...The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…
view full answer...There are 3 different mounting bracket styles depending on how exactly you're wanting to install the Premium Slim LED Strip Light #TN38ZR: - Standard Mount #TN22VR - 45 Degree Mount #TN34ZR - 90 Degree Mount #TN54ZR These…
view full answer...I have a solution for you, but we do not offer that exact light that you've mentioned. However, from what I was able to find out, that light is a surface mounted LED light with a switch that is approximately…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Eric
Cedar Springs, MI