2019 Shasta Phoenix Fifth Wheel RV Exterior Lighting

Features:

This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. Hardwires to any 12V power source.

Features:

150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.

Features:

8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.

Features:

3" x 1-1/16" x 5/8". Low profile utility light provides bright white light. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included hardware. 2-Wire design.

Features:

4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.

Features:

8-5/8" x 3-1/4". LED trailer light with ABS mounting bracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design.

Features:

2-3/4" x 1-3/8" Rectangle. Mini LED trailer light illuminates your license plate. Durable ABS housing protects light against road debris. Surface mount with foam gasket - hardware included. 2-Wire design.

Features:

2-3/4" x 1-3/8" Rectangle. Low-profile LED trailer light with chrome-plated polycarbonate housing illuminates your license plate. Surface mount with foam gasket - hardware included. 2-Wire design.

Features:

15-1/2" x 9-1/2" Rectangle. Black molded frame holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.

Features:

4" Long x 1-9/16" tall x 2-5/8" deep. Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. Clear lens.

Features:

8-3/8" Long x 2-1/2" tall. Black molded bracket holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.

Features:

6-1/2" x 2-1/8" Oval. Waterproof, LED trailer utility light produces bright white light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 2-prong or 3-prong plug.

Features:

8-3/4" x 3" Low-profile LED light illuminates an exterior area with bright white light. Light emits at 45-degree downward angle. Durable polycarbonate housing and lens. Surface mount with built-in flange. 2-Wire pigtail. 12 Diodes.

Features:

18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use

Features:

2-3/4" x 1-7/8" x 2". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount on 1-3/4" centers with included studs. 2-Wire pigtail with power and ground. Studs included.

Features:

Angled, incandescent porch light directs warm yellow light onto your RV or camper's steps so you can see after dark. Unlike lights with a glass lens, this light has an acrylic lens that won't shatter if hit by a branch or rock.

Features:

7-1/2" x 3-1/4" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing. Recessed mount with built-in flange. Accepts standard 2-prong plug.

Features:

15" x 1-3/8". Waterproof, LED utility light bar provides bright white light for your application. Ultra-thin design fits in tight spaces. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design.

Features:

2-5/16" x 2-5/16". LED security light illuminates your RV's exterior with what white light to deter unwanted guests. Surface mount - hardware not included. 2-Wire pigtail.

Features:

8-5/8" x 3-1/4" x 1-15/16". Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.

Features:

3-3/8" Long x 2-3/8" wide x 2-3/16" deep. Round, incandescent trailer light illuminates your license plate. Chrome-plated steel housing. Surface mount with mounting ears. Single wire design grounds through the mounting hardware.

Features:

4" x 2" x 1-15/16". Waterproof LED trailer light illuminates your license plate. Stainless steel mounting base. Durable polycarbonate lens and housing. Surface mount to trailer - hardware not included. Accepts standard 2-prong plug.

Features:

21' L x 2" wide; alternating red/white reflector tape; DOT certified; rated for 7 years of use

Features:

1-13/16" Long x 2-1/2" wide x 2" deep. Single-LED trailer light illuminates your license plate. Chrome-plated steel housing has a built-in flange for surface-mount installation. 2-Wire pigtail with power and ground wires.

Features:

150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years of use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" Silver/11" red, perforated.

Features:

18" Long x 2" wide. Alternating red/white reflector tape makes your truck or trailer more visible in low light. 7" White/11" red pattern. Industrial-strength adhesive backing for easy mounting. 4 Strips included.

Features:

4" x 1-1/4" Rectangle. Red and amber trailer reflectors meet FMVSS requirements for reflex reflectors. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

5-3/4" x 3-1/8" Rectangle. Multipurpose LED light illuminates the interior or exterior of your RV, camper, or trailer with bright light. Screw-on lens. Surface mount. 2-Wire design.

Features:

7-9/16" x 3-5/16" Oval. Waterproof LED utility light provides bright light to illuminate an area. Durable polycarbonate housing and lens. Surface mount with built-in flange - no panel cutout required. 2-Wire design.

Features:

Motion-activated, solar powered LED porch light with dusk-to-dawn sensor provides lighting, safety, and security. 3 Preset modes let you customize the light to suit your needs. Solar panels charge the battery so there's no wiring required.

Features:

2-1/8" x 1-3/8" x 1-3/4". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.

Features:

1-1/2" Diameter round. LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. Durable chrome-plated steel housing. Easy, snap-in installation. 2-Wire pigtail.

Features:

4" x 1-11/16" Rectangle. LED trailer light illuminates your trailer's license plate. Great White series features custom-cut lens optics and ultra-bright white diodes. Durable metal base with chrome housing. Surface mount. 2-Wire design.

Features:

Water-resistant utility light brightens up your enclosed trailer for unloading gear after dark or the outside of your RV for those warm summer barbecue nights with the family. Cool white LEDs last longer and burn brighter than incandescent bulbs.

Features:

8-5/8" x 2-5/8" x 2-1/2". Trailer light illuminates your license plate. Durable ABS housing and polycarbonate lens. Surface mount with included bracket. 2-Wire pigtail.

Features:

4" x 1-3/4" x 2-1/4". Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Durable ABS housing. Surface mounts to trailer. 1-Wire design. (1) 168 bulb.

Features:

2-1/2" x 1-1/4" x 13/16". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount - requires bracket (sold separately). Accepts standard 2-prong plug.

Features:

7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverse light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.

Features:

1-1/2" Diameter round. Waterproof trailer light with chrome-plated brass housing illuminates your license plate. Easy, snap-in installation. 2-Wire pigtail includes lead and ground wires. White polycarbonate lens with white LEDs.

Features:

3-3/8" x 1-3/4" Rectangle. Waterproof, incandescent trailer light illuminates your trailer's license plate. Durable polycarbonate housing and lens. Surface mount with mounting ears - hardware not included. Accepts standard 2-wire plug.

Features:

3-3/16" x 1-7/16" Rectangle. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

3" x 1-1/16" x 1-9/16". Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount above license plate. 2-Wire lead with 0.180 bullets.

Features:

4-1/8" x 2-3/4" x 1-7/8". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount using mounting ears - hardware not included. 2-Wire pigtail with power and ground.

Features:

2-1/2" x 1-3/16" Rectangle. Waterproof, incandescent trailer light illuminates your license plate. Bulb can be easily replaced. Multiple mounting options. Accepts industry standard 2-prong plug. (1) 194 Bulb.

Features:

2-1/2" x 1-1/16" Rectangle. Low-profile LED utility light illuminates an interior area with bright light. Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design with 0.180 female barrels.

Features:

3" x 3" LED utility light produces a bright white light. Flood beam illuminates a wide area. Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Flange mount with included hardware. 6 Diodes.

Features:

2-11/16" x 1-1/2" x 2-1/8". Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Durable ABS housing. Surface mounts to trailer. 1-Wire design. (1) 168 bulb.

Features:

7-9/16" x 3-5/16" Oval. Waterproof LED utility light provides bright light to illuminate an area. Durable polycarbonate housing and lens. Surface mount with built-in flange - no panel cutout required. Accepts industry standard 3-prong plug.

Features:

3-3/16" x 1-7/16" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

15-1/2" x 9-1/2" Rectangle. This white molded bracket holds your trailer's standard size license plate. Built-in LED light illuminates your license plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.

Features:

4" x 1-1/4" Rectangle, red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

3/4" Diameter round. Waterproof trailer light illuminates your license plate when mounted with the required bracket (sold separately). 2-Wire pigtail with 0.108 female barrels. Clear lens with white LEDs.

Features:

3/4" Diameter waterproof utility light with black trim ring illuminates your trailer's interior with bright white light. Durable polycarbonate housing and lens. Recessed mounted with included grommet. 2-Wire pigtail.

Features:

2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

3-7/8" x 1-1/4" Rectangle. Waterproof LED trailer light illuminates an exterior area with bright light. Durable polycarbonate housing and lens. Surface mounts with bracket (sold separately). Accepts standard 1-wire or 2-wire plug.

Features:

8-5/8" Long x 3-1/4" wide x 2-5/16" thick. Incandescent trailer light illuminates your license plate. Surface mounts to trailer with mounting bracket - hardware not included. 2-Wire design. (1) 67 Bulb.

Features:

4-7/16" x 1-15/16" Oval. Red trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.

Features:

2-5/8" x 1-9/16" Rectangle. Incandescent trailer light with chrome-plated housing illuminates your license plate. Bulb can be easily replaced. Stud mount to trailer. 1-Wire design. (1) 194 Bulb.

Features:

3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 2-Wire pigtail.

Features:

3-1/2" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.

Features:

This rectangular, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.

Features:

1-1/16" Diameter round. Mini LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Recessed mount with included grommet. 2-Wire lead design 0.180 bullets.

Features:

1-5/16" Diam x 2" L on a Base; Chrome-plated armored steel housing; replaceable bulb; surface mount on 2" centers; 1-wire; 1-bulb incandescent

Features:

3-7/8" x 1-1/4" Rectangle. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

3-13/16" x 1-3/16" Rectangle. Waterproof, incandescent trailer light illuminates your license plate. Mounts on surface of trailer - mounting bracket not included. Accepts industry standard 2-prong plug.

Features:

6" Oval. Waterproof utility light for truck or trailer. Mounts on surface with built-in black flange - hardware not included. 30" Molded wiring harness with weathertight connection included. 10 White LEDs. Frosted lens.

Features:

3-1/8" x 1-3/8" Rectangle red reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

3-3/8" x 1-1/4" x 2-3/8". Waterproof license plate light illuminates your license plate. Single incandescent bulb is easily replaceable. Surface mount - hardware not included. Accepts standard 2-prong plug. 1 bulb.

Features:

3-1/8" x 1-3/8" Rectangle amber reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application.

Features:

4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.

Features:

4-1/2" x 3-3/4" Oval. Low-profile trailer reflector increases visibility of vehicle in low lighting. Durable aluminum housing. Surface mount to trailer - hardware not included.

Features:

This rectangular, amber reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.

Features:

3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.

Features:

2-1/8" x 1-1/8" Rectangle. Incandescent trailer light functions as a utility or license plate light. Durable stainless steel base. Snap-on lens. Stud mount to trailer - hardware included. 1-Wire design. 1 Bulb.

Features:

18" L x 2" W; alternating red/white reflector tape; 4 strips; DOT certified; rated for 7 years of use

Features:

2-1/2" x 1-1/4" Rectangle. Waterproof LED trailer light illuminates your license plate. Requires mounting bracket or grommet (sold separately) for installation. 2-Wire pigtail with power and ground wires. Clear lens.

Features:

This 13' flexible and long-lasting LED strip provides strong lighting for your RV awning and can also be used inside the vehicle when you need extra light. 3M Tape on back sticks to most surfaces. Connection cable included.

Features:

3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 3-Wire pigtail.

Features:

2-3/16" Round reflector; acrylic lens; surface mount; self-adhesive; red lens

Features:

Gray-coated license-plate light with adhesive surface mount and replaceable bulb

Features:

3" Diameter amber trailer reflector enhances visibility on the road. Designed for use on side or rear of your truck, trailer, or equipment. Durable polyester construction for outdoor use. Surface mount adhesive backing. J578 and J594 compliant

Features:

3-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.

Features:

3-3/16" x 1-11/16" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Chrome bezel provides a finished look when installed. Simple installation with adhesive backing.

Features:

4-3/8" x 1-15/16" Oval. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.

Features:

2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.

Features:

4-5/16" x 1-11/16" Rectangle amber reflector. Self-adhesive backing allows for stick-on application.

Features:

This 3" round, red reflective sticker is designed for use on the side or rear of your truck, trailer, or equipment. The tough polyester reflector stands up to outdoor use. Simple installation with adhesive backing. SAE J578 and J594 compliant.

Features:

3-3/16" Diameter. Yellow trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.

Features:

1-1/2" Diameter x 2" long. Incandescent trailer light illuminates your license plate. Durable chrome-plated brass construction. Snap-in mounting. 1-Wire design. (1) 67 bulb.

Features:

3-3/16" Diameter. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Meets FMVSS requirements.

Features:

4-3/8" x 1-15/16" Oval. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. Meets FMVSS requirements.

Features:

3-3/16" Diameter. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with adhesive backing. Meets FMVSS requirements.

Features:

8-7/8" x 2-7/8" x 2-1/4". Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Surface mounts to trailer with powder-coated steel bracket. 1-Wire design. (1) 168 bulb.

Features:

4-7/16" x 1-15/16" Oval. Amber trailer reflector meets FMVSS requirements for reflex reflector. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting.

Features:

2" Diameter waterproof utility light illuminates your trailer's interior with bright white light. Durable polycarbonate lens and housing. Flush mount with grommet (sold separately). Accepts industry standard 2-prong plug.

Features:

2-3/4" x 1-3/4" Rectangle. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

2-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.

Features:

2-3/16" Diameter red trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.

Features:

2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

3-3/16" Diameter amber trailer reflector enhances visibility on the road. Durable acrylic construction. Surface mounts with a single screw (not included). Meets FMVSS requirements.

Features:

2-7/8" Diameter round. Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.

Features:

This 13' flexible light strip provides strong white light to your campsite. Suitable for use inside or outside your vehicle. Can be shortened to fit the right length.

Features:

4-5/16" x 1-11/16" Rectangle red reflector. Self-adhesive backing allows for stick-on application.

Features:

2-9/16" x 1-1/4" Rectangle. Incandescent trailer light illuminates your license plate when properly mounted. Durable chrome-plated housing. Gasket helps create a weathertight seal. Surface mount to trailer. 2-Wire design. (1) 194 bulb.

Features:

Low-profile utility light illuminates an interior or exterior area with bright white light. Durable polycarbonate lens and housing. Surface mount - hardware not included. Hardwired with separate ground.

Features:

4-5/16" Diameter round. Waterproof, LED trailer utility light produces bright white light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug.

Features:

2" Diameter waterproof LED utility light adds bright white light to an interior area. Miro-Flex design provides increased light output with a contemporary design. Flush mount with grommet (sold separately). Accepts standard 2-prong plug.

Features:

13-5/8" x 10-7/8" Rectangle. LED utility light illuminates an exterior area with bright white light. Durable aluminum construction with silver powder coat resists corrosion. Mounts flush to exterior trailer wall.

Features:

4-5/16" x 2" Oblong. Low profile LED light illuminates your RV or trailer's exterior with bright white light at a downward angle. Durable die-cast aluminum housing and polycarbonate lens. Surface mount. 2-Wire pigtail.

Features:

4" Long x 1-3/4" wide x 2-5/16" thick. Incandescent trailer light illuminates your license plate. Durable stainless steel mounting base. Stud mount to trailer - hardware not included. 1-Wire design. (1) 194 Bulb.

Features:

7-9/16" x 3-5/16" Oval. Waterproof trailer utility light provides bright white light where needed. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. Accepts industry standard 2-prong plug.

Features:

1-1/2" Diameter round. Waterproof, incandescent trailer light with illuminates your trailer's license plate. Durable chrome-plated steel housing. Snap-in design secures into 1-1/4" diameter cutout. 1-Wire design. (1) 168 bulb.

Features:

2-1/2" x 1-1/16" Rectangle. Low-profile LED trailer light illuminates an area with bright light. Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design with 0.156 male bullets.

Features:

150' L x 2" W; alternating red/white reflector tape. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 7" White/11" red pattern, perforated. 1,000 Candlepower.