LED Strip Lights Specs:
Features:
Change this light strip's color, pattern, and brightness with the wireless RF remote control. Weatherproof light can be cut to fit anywhere you need it - under an RV awning, in a closet, or on a boat. Black backing provides a cool, sleek look.
More Information >Videos
for RV Exterior Lights
Help Articles
for RV Exterior Lights
Expert Answers
for RV Exterior Lights
I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights…
view full answer...Yes, the Demco Recon fifth wheel to gooseneck adapter part #DM8550045 would be a great option for you. It fits your ball size, has a jaw design that holds the king pin tightly for a quieter ride quality, and also is height adjustable which makes…
view full answer...You have a good eye as the black tubing sections are plastic for the Camco Gen-Turi RV Generator Exhaust System #CAM44461. It's just the curved pipe section that is made out of stainless steel.
view full answer...There is a tab on the top of the Porch Light part #DG52526PB that you will push down with a small slot screwdriver which will allow the cover to pull forward and give you access to the mounting screws on the base of the light.
view full answer...There unfortunately isn't a guide that lists the parts used on your trailer so you'll need to do a bit of investigating to see what you currently have so that we can determine the correct replacement. The first thing I like to check is the…
view full answer...I didn't receive a picture which you can email to me directly if you would like. However, since you have a Dexter D60 axle you will need the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal item #BK3-200 you were looking at.
view full answer...The side plates of the B&W gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail of your 2004 Dodge 2500 8-foot bed. See the B&W video I included at the 7 min and 30 second mark. If your Firestone air bags like…
view full answer...I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they aren't really designed to have the bulbs replaced.…
view full answer...The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be a…
view full answer...Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…
view full answer...The Pollak switch part #PK34513 that you referenced would be a great option, but I'd rather recommend you go with the Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount #337SW911 as this setup was made for your exact…
view full answer...Filter Products (2)