Features:
With its all-aluminum body and multi-fin design, this replacement fan clutch offers superior functioning.
More Information >Features:
With its all-aluminum body and multi-fin design, this replacement fan clutch offers superior functioning.
Installation Notes:
Application suitable for vehicles with air conditioning
More Information >Features:
With its all-aluminum body and multi-fin design, this replacement fan clutch offers superior functioning.
More Information >Videos
for Radiator Fans
Help Articles
for Radiator Fans
Expert Answers
for Radiator Fans
Hey David, the Derale transmission cooler part #D15200 that you referenced does not come with a thermostat or any install kit components but if you wanted a similar option that does have all of that you would want the part #D15500.
view full answer...The towing capacity of the 2003 Chevrolet Avalanche 1500 with 5.3L V8 and 4.10 rear axle is 8100-lbs. For a 7600-lb GVWR travel trailer the resulting 500-lb safety margin is adequate/low-ish. With a trailer that weighs substantially more than the tow…
view full answer...Hey Mike, yes the replacement cap part #T097-022-00 that you referenced is the correct replacement cap for a Dexter Model A-60/A-75 brake actuator like it sounds like you have.
view full answer...First you will need the Fan #FLX236 which will be controlled using the Flex-a-lite Adjustable Temperature Controller #FLX31149 on your 2005 GMC Envoy. You can also add the Auxiliary Switch #FLX31148 if you want to be able to turn on the fan manually.…
view full answer...Hey Jim, for that weight trailer and your 2004 Ford F-250 I would recommend the Equal-i-zer kit part #EQ37140ET which has a tongue weight range of 1,100 lb to 1,400 lb and is widely considered the best WD and sway control around so this will work…
view full answer...The choice of oil bath or regular hubs is up to the manufacturer. They are usually found on higher capacity axles, though as you know there are some on lower capacity axles. You can convert some hubs from grease to oil bath using a kit such as…
view full answer...Each of the fans of the Flex-a-lite Dual 13-1/2" Electric Radiator Fans w/ Shroud #FLX295 can flow up to 2,300 CFM. Also worth mentioning is that the likelihood of one of the fans failing is very low.
view full answer...Hey Todd, thanks for reaching out, and for providing all of those pictures and dimensions. Sounds like you are going to get to hang on to your firstborn child though lol since we do not carry anything really even remotely close to the Glow-Brite M…
view full answer...That's pretty hard to give an exact answer on but with the install of the Derale Electra-Cool Combo Engine and Transmission Cooler Assembly w/ Fan #D15200 you'd see the fluid stay right around 175 degrees in traffic on a hot day since the fan…
view full answer...I believe the tail lights you have are the TecNiq T60 lights which are industry standard 6" oval recessed lights. To replace those you can use the Optronics Fleet LED Trailer Tail Lights #TLL12RK. If your lights look different than this please…
view full answer...Hello Jeremy, thanks for reaching out. The Air Lift Air Helper Spring Cradles #AL59DQ will only work with the Air Lift brand bellows-style air bags. They will not work with the Firestone air bags.
view full answer...