1988 Ford Bronco Radiator Fan

Hi Bob! The Timbren #TGMRG25C you ordered will have 6,000 pounds of load assist and will be the highest rated option available for your 2003 Tahoe. This will definitely solve your sagging issue, especially if you are close to or at the maximum load…

Yes, there is a bolt that goes all the way through that holds the Timbren Rear Suspension Enhancement System item #TGMRG25C in place. I have linked the instructions and an installation video below so you can see the steps involved and all the tools…

Both of the 2" receivers on the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers #TLF1006 have the same tongue weight rating of 1700lbs and trailer weight rating of 17000lbs, Or 2000lb…

Yes, the Flex-a-lite Direct Fan Dual Electric Radiator Fan with Shroud #FLX284 can be used for towing applications on your 2004 Chevy Silverado with the 6.6L V8 diesel engine. Unfortunately, this fan (and all other fans) does not change the maximum…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Thanks for reaching out! Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt Wiring Kit #C59236 which splices into your current wiring and get powered directly by the battery on your vehicle.

The Flex-a-lite 16" LoBoy Electric Radiator Fan 2,500 CFM #FLX118 is the puller fan equivalent of the model #FLX119 you were looking at so if the 16" wide x 16-1/2" tall x 3-3/16" deep dimensions work for you then this is exactly…

The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally cooled…

The first thing you will want to do is inspect your suspension system to make sure it is in good working order. If you have a weak suspension and relying on the Timbrens you already have installed, you will get more bounce than normal. The Timbrens…

To see installation details for both hitches, click the provided links. The Curt #C14011 installs using 18mm bolts that use existing nut plates in your Excursion's frame. No drilling is required to completed the installation. The hitch has a…

The TorkLift SuperHitch Original Trailer Hitch Receiver part #TLF1006 is designed to be a direct bolt on installation. It offers a 1,700 lb. tongue weight rating when used typically or 2,000 lbs. when used with weight distributionand will takes care…