Reese Goosebox to Fit a 2022 Grand Design Solitude 380FL

Question

Question:

I have a 2022 grand design solitude 380 FL I want to put a goose box hitch on it , will it fit and do I need the spacers? I added a pic of the stickers on the frame. Thanks

asked by: James

0

Expert Reply:

Your 2022 Grand Design Solitude 380FL has a 1621 pin box according to your sticker and my contact at Lippert. This means the Reese Goose Box # RP85FR rated for 20K is what you're needing!

expert reply by: Jon G

0

Pin Box Sticker on a 2022 Grand Design Solitude 380FL
(click to enlarge)

Answer 1

I reached out to Gen-Y directly and found that the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box - Lippert 1621, 1621 HD #GY36FR will require the 1/4" Shim Kit #GY76FR to take up that extra space since you are using the Bolt…

view full answer...

Answer 2

So the Custom Third Brake Light Camera for Aftermarket Monitor #3460012 is only designed to work with trucks that do not already have a factory reverse camera, and also wouldn't allow you to use your existing display. Since you mentioned you have…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Hey Dan, for your 2024 Ford F-350 that has the OEM pucks the correct Pullrite sliding hitch you need is the part #PUL73RR. The #PUL63RR fits the standard above bed fifth wheel rails that are 22 inches apart on center. What fifth wheel do you have?

view full answer...

Answer 7

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 10

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Reese Goosebox to Fit a 2022 Grand Design Solitude 380FL

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching