Replacement Lid & Operator Mechanism For MaxxFan Plus 4500K Roof Vent

Question

Question:

Thanks Kyle The lift arm looks tweaked also on 1side. Could that b why it will not fully engage In open position? I will order the operator part u suggested if u think that is the issue instead. Do u have a suggestion for the seized set screw to remove fan blade to access parts to replace? Thanks

asked by: Joy W

0

Expert Reply:

Let's go ahead and start with the lift mechanism, which is also called the operator mechanism for your MaxxFan Plus Roof Vent # MA00-04500K, which is faulty and why your fan won't stay open. For that we do offer the replacement:

- Replacement Operator Mechanism # MA10-20281K-1AF

In regards to the replacement lid in Smoke for your MaxxFan Plus vent, we do have that part, which is the following:

- Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents - Smoke # MA10A40009K

expert reply by: Kyle S

0

Joe W.

4/29/2021

Thanks Kyle The lift arm looks tweaked also on 1side. Could that b why it will not fully engage In open position? I will order the operator part u suggested if u think that is the issue instead. Do u have a suggestion for the seized set screw to remove fan blade to access parts to replace? Thanks

Reply

Kyle S.

4/29/2021

If the lift arm itself looks "tweaked" or somehow damaged, then I do recommend replacing that as well: - Replacement Lift Arm for MaxxFan Roof Vents # MA10-20222KS As for the seized screw, there really isn't much we can offer there other than home remedies like holding a screwdriver in place and trying to turn it slowly while hitting the back of the screwdriver with a hammer to create sort of an impact wrench.

Reply

Answer 1

If you need hardware to install the MaxxFan Plus Roof Vent part #MA00-04500K I recommend using the Roof Vent Installation Kit part #344270KITW for white or part #344270KITB for beige. These kits come with all the screws, butyl tape, and sealant you…

view full answer...

Answer 2

I was able to confirm that the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White #V2092SP-28 you were looking at is white in color. The #V2094SP-28 has a white lid, but uses a birch white trim which is an off white…

view full answer...

Answer 3

To install a roof vent lid like the Replacement Lid for MaxxAir MaxxFan Deluxe #MA05-30510 for the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-05301K, isn't considered to be a difficult task at all. The unit does not have to be removed from the…

view full answer...

Answer 4

I do have a few options for you. But we do not have the 12-00057, from what I could find it is a smoke color lid. We have the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent #MA00-335002 which is a universal style lid in smoke.…

view full answer...

Answer 5

The Replacement Lid #A10-3376 you're looking at is a generic option made by Dometic and is designed to fit vents with that center lift arm. Since your MaxxFan Plus Roof Vent #MA00-04500K has a different lift design I recommend sticking with the…

view full answer...

Answer 6

Hi there Mike! Yes, you can technically replace the Coleman Max Q AC in your 2024 Alliance 26RD with a MaxxFan, but there are a few things to keep in mind. The MaxxFan part #MA00-04500K will fit in the same 14" x 14" roof opening, which is…

view full answer...

Answer 7

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 8

Hey Adam! The Furrion Chill Cube RV AC w/ Air Distribution Box item #FR69TD includes the wall mounted thermostat whereas item #FR99TD does not. You'll definitely need the one with the thermostat if you have a furnace. What kind of trailer or RV…

view full answer...

Answer 9

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 10

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 11

Hey Jordan, Yep, I went ahead and verified directly with Timbren the Timbren Suspension Enhancement System - Severe Service #TGMRTT35D are indeed a fit for your 2025 Chevy Silverado 2500 ZR2. That said, the Severe Service kit is designed for trucks…

view full answer...

Answer 12

Hello Gary, When hooking up the Redarc MC4 Connector Kit for Solar Panels #RED98VR, 8 AWG wire will be too thick to fit properly. Instead, you'll want to use 11 AWG wire, which is the correct size for the SRC0001 connectors. I've attached an…

view full answer...

Replacement Lid & Operator Mechanism For MaxxFan Plus 4500K Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching