Where to Connect Curt Stabilizer Strap When Using with a Camper

Question

Question:

How do you connect it to back of camper? There does not seem to be any places to hook to.

asked by: Jeffery C

0

Expert Reply:

You can actually attach the Curt Stabilier Strap # 18050 to the safety chain loops on your Curt trailer hitch. I reached out to Curt and they confirmed that this is how you want to use the strap when a hatch is not readily available (like on some passenger vehicles).

expert reply by: Jon G

0

Answer 1

Although the Kuat Alpha has a 3 bike capacity, when it is used with a class I receiver such as the one on your Mazda, you should only place 2 bikes on it. This is not only due to the limited tongue weight capacity of the hitch, but also because of…

view full answer...

Answer 2

The Curt stabilization strap #18050 comes in two parts. The shorter part with the loop that fits around the bike carrier mast is 18 inches long overall from the end of the buckle to the end of the closed loop. The longer end is 63-1/2 inches long…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Thank you for your insight, Alan! I 100% agree with you that the whole feeding bolts through the frame and lifting the hitch in place can be super tricky and it's easy to lose bolts inside the frame. The only real issue with going with smaller…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Hello Chris, thanks for getting in touch. I can confirm that the Curt Class 1 Hitch #C11354 will be a fit for your 2013 VW Beetle Turbo 2.0, and it will indeed be a no-drill install. You will have to fish bolts thru the frame using the included fish…

view full answer...

Answer 8

For your 2017 Chevrolet Bolt EV, the Curt Trailer Hitch Receiver Class I - 1-1/4" #C11457 according to Curt's instructions requires stabilization strap #18050 for any non-trailer load including bike racks and cargo carriers. It is one of the…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Where to Connect Curt Stabilizer Strap When Using with a Camper

Product Page this Question was Asked From

Continue Researching