5th Wheel Landing Gear Motor Operates But No Lift on Jacks
Updated 12/08/2014 | Published 12/05/2014 >
Products Featured in This Question
Question:
Hello! I have a 1993 fleetwood prowler 5th wheel 30 ft. when I try to raise it when the weight is on legs it wont raise. motor is working the shaft is spinning but wont extend, it will lower! can you help! Thanks
asked by: Jeff G
Expert Reply:
It sounds like the internal screw mechanism in your landing gear is damaged. This would explain why the motor works but still no lift and why with gravity's help it will lower only.
When it comes to jacks, winches and landing gear we suggest choosing an item with more capacity than you actually need. Using an over-spec jack means it has to work less hard to do the job and may potentially last longer since it is not being operated near its maximum limit.
We do offer a range of powered landing gear that can be seen on the link at right. For maximum capacity I suggest the weld-on Ultra-Fab # UF17-943010 which features dual motors for easier leveling, 38-inch travel at a 15-seconds-per-inch rate and extra-large foot plates to prevent sinking into soft ground.
At right you will find a link to the installation and operating instructions.
Product Page this Question was Asked From
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 7001 - 8000 lbs
- Manual Jack
- 36 Inch Lift
- Weld-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: All You Need to Know About the Landing Gear Set
- Q&A: Replacement Landing Gear Follow Leg for 1994 Prowler by Fleetwood
- Shop: Replacement Bevel Gears for HappiJac Truck Camper Jack Systems
- Shop: Replacement Gear Kit for etrailer and Ram Sidewind Jacks - 2,000 lbs and 5,000 lbs
- Shop: Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
- Shop: Lead Jack Repair Kit for Stromberg Carlson Landing Gear
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Search Results: trailer jack
- Shop: Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 5,000 or 7,000 lbs
- Shop: Trailer Hitch
- Shop: Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear
- Search Results: static/images/styles/checksvg
- Q&A: How to Choose the Correct Replacement Landing Gear for 5th Wheel Trailer
- Q&A: Replacement Follow Landing Gear Leg for 1998 Fleetwood Savanna 5th Wheel
- Q&A: Is there a Way to Identify 5th Wheel Trailer Landing Gear with No Markings
- Q&A: Replacement Motor For Landing Gear on 2008 Heartland Razor Toy Hauler
- Q&A: What Is The Difference Between The Landing Gear Set RVLG-8000 & RVLG-8HDL?
- Q&A: Replacement Landing Gear for a 1996 Sea Breeze 5th Wheel Trailer
- Article: Best Landing Gear
- Article: What Do I Need To Tow A Trailer?
- Article: Gooseneck to 5th Wheel Adapters
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: RV Winterization Guide: Step-by-Step Process from the Pros
- Article: 7 Facts About RV Antifreeze Every RVer Should Know
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps

