Replacement Jack Handle Availability for a Fulton Magnum Series Jack

Question

Question:

does this part fit the magnum series jack? i cant find the model number on the jack

asked by: Tim H

0

Expert Reply:

I spoke to my contact at Fulton and he informed me that the Fulton Magnum series jacks were an older line of jacks that had capacities of over 1,000 lbs. Without knowing what capacity your jack is or what model it is it would be hard to pick out the correct handle.

If you have a round tube jack with a sidewind handle and the capacity is above the 1,500 lbs the # F0933305S00 that you referenced would be the correct handle.

If it's lower than 1,500, the part # F0933301S00 would be the correct handle.

If it's a square tube jack most likely we don't have a replacement handle.

expert reply by: Jameson C

0

Matthew E.

5/4/2020

I have an older fulton trailer for a pontoon. The handle broke and I am not sure what weight to get. It is the sidewind type. There is a Patent number on the top of it 390-50. Would you be able to tell me the weight rate habdle for it.Thank you

Chris R.

5/6/2020

Unfortunately I wasn't able to track down what model jack you have on the trailer using the patent number you found. Do you happen to have a picture that you could email me directly?

Answer 1

Absolutely! I reached out to my contact at Fulton and for your Fulton 2840025 you will need the following parts: Gear Kit #BD500106 Bearing Kit #BD500224 Replacement Handle Kit #BD500171 Replacement Cap #BD500205 The handle kit that was originally on…

view full answer...

Answer 2

It may be possible to get another handle; I would need to know the model number of your jack in order to see if there is a compatible replacement. Do you know the model number of your jack? I was unable to find any reference to a Fulton Maximum…

view full answer...

Answer 3

I have another option for you, but the closest standard axle we offer to your 86-1/2" hub face to hub face measurement is the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which measures 89" hub…

view full answer...

Answer 4

Hello Paul, thanks for reaching out. The Fulton Magnum jacks are an older line of jacks that are no longer made. Fortunately Fulton hasn't changed their design much so they still make compatible handles. If the Fulton Magnum series has a capacity…

view full answer...

Answer 5

It sounds like you need the Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks - 1,500 lbs #F0933305S00 fitting jack models TJ1055, TJ1057, TJ1222, TJ255, TJD125, TJ122F, XP15/L/W/WC and XP15L. We also have the kit #F0933301S00…

view full answer...

Answer 6

We do offer a couple of replacement handles that are designed for Fulton jacks. part #F0933305S00 is designed to fit Fulton jack models TJ1055, TJ1057, TJ1222, TJ255, TJD125, TJ122F, XP15/L/W/WC and XP15L. I have attached a photo of this handle that…

view full answer...

Answer 7

You have two choices for a replacement handle for the obsolete Reese trailer jack 74410. The first option is the Fulton Sidewind 800 lb Handle #F0933301S00. Your second option is the Fulton Sidwind 1500 lb Handle #F0933305S00. My technical contact at…

view full answer...

Answer 8

Both the Fulton 800 lb Handle #F0933301S00 and the 1,500 lb Handle #F0933305S00 have the same diameter so you just need to make sure that the distance from the end of the handle to the pin hole is similar to what you currently have.

view full answer...

Answer 9

With the Magnum series of Fulton jacks being obsolete you will want to disassemble your jack to verify if the handle shaft matches on the Replacement Sidewind Handle Kit #F0933305S00. Even with knowing the model number on your Jack it is difficult to…

view full answer...

Answer 10

Thank you for that photo, and while we do have the parts you need, the plastic part of the handle and retaining clip are not available as individual replacement parts so you will need to get the replacement handle, which comes with those parts. The…

view full answer...

Answer 11

We do have the replacement handle kit for your Fulton Round Snap-Ring Swivel Marine Jack #FTJ12000101 with part #F0933305S00. Just the hand grip portion of the handle though is not available as a separate part from the manufacturer. The Handle Kit…

view full answer...

Answer 12

We actually have some videos on how to rebuild various jacks on our website. The video that shows a Fulton jack, like part #FXP10W0301, being rebuilt also includes replacing the handle #F0933301S00 as well. I have linked this video for you to…

view full answer...

Replacement Jack Handle Availability for a Fulton Magnum Series Jack

Continue Researching