Replacement Hubs for 2000 Dutchman Voyager Pop-Up Camper

Updated 09/22/2014 | Published 09/21/2014

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings

(902)

$65.12

Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings

(902)

$79.53

Question:

I have a 2000 Dutchman Voyager 801D pop up camper. I would like to replace the wheel hubs. The only information that I have is what is stamped on the bearing. VPZ-15-MRI L44649 RUSSIA. They are a 4-bolt hub, 13. Any information and direction would be appreciated. Thank you.

asked by: Craig F

Expert Reply:

To select proper new hubs for your trailer you will need to confirm a few things: bolt pattern (see linked article), inner and outer bearing numbers (see linked photo) and axle weight rating (which should be indicated on a sticker or plate on the axle).

You can then use the link provided to see our main page for hubs. Filters in the left margin will allow you to narrow the results based on your bearings, bolt pattern, wheel size and weight requirement, as well as whether or not you need brake drums.

For example, if you need an idler hub (no brakes) with a 4-on-4-inch bolt pattern for a 2000-lb-rated axle and 13-inch wheels, and your bearings are both L44649, then you can use # 8-91-05UC1.

expert reply by: Adam R