Replacement Coupler for the Yakima Rack and Roll Trailer

Question

Question:

Rack and Roll Trailer - I broke the metal lock on the tongue. Do you sell replacement locks?

asked by: Kristen

0

Expert Reply:

I think you mean that you broke the coupler of your Yakima Rack and Roll trailer like part # Y08107, which if this is the case you would want the part # Y08123.

expert reply by: Jameson C

0

Answer 1

If you check out the picture I attached you will see where I pointed out where the sticker is that has the VIN on the Yakima Rack and Roll trailers like the part #Y08106. If somehow the sticker is worn off or unreadable my contact at Yakima said that…

view full answer...

Answer 2

If you are already planning on needing more space than the 66" Yakima Rack and Roll Trailer #Y08106 can provide then I highly recommend going ahead and getting the 78" Rack and Roll #Y08107 instead. The 78" trailer is a whole foot…

view full answer...

Answer 3

According to Yakima, the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 should only be used if you add the 78" crossmember kit #Y08111. They didn't have an exact reason for this, but it sounds like the concern is people will…

view full answer...

Answer 4

Replacement Left Side Fender for Yakima Rack and Roll Trailers - Qty 1 #Y8880164 and right side #Y8880163 are intended to be priced equally. The reason why they are not at this moment is that the right fender is on sale in our system. Why they both…

view full answer...

Answer 5

I reached out to my contact at Yakima and they confirmed that the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 will fit on the Yakima Rack and Roll Trailer - 66 inch #Y08106. However the 66 inch trailer is not able to carry more than…

view full answer...

Answer 6

The Single Axle Trailer Fender w Top Step - Style B - Black Plastic - 8" to 12" Wheels - Qty 1 #F008559 can be painted, but there is some work to do with painting plastic as you stated. To paint it so it won't peel, you will need to wet…

view full answer...

Answer 7

Most states require the Yakima Rack and Roll Trailer, #Y08106, to be registered, but it registers just like a regular trailer. We provide you with a Manufacturing Certificate of Origin and a VIN number. Take the paperwork provided to your Department…

view full answer...

Answer 8

The Yakima Rack and Roll Trailer #Y08107 referenced in your question requires a 2 inch hitch ball, such as the Curt #A-90. For optimum performance, Yakima states that the hitch ball should be installed 22 inches above the ground. You will want to…

view full answer...

Answer 9

Hey Larry, we actually have a replacement coupler for the Yakima Rack and Roll trailers that fits the 2 inch ball size with the part #Y08123. This would be exactly what you are looking for to convert your trailer to fit a 2 inch hitch ball.

view full answer...

Answer 10

Hey Kraig, Along with the 1-1/2" wrench or socket, most installers use a 1-1/4" to 1-1/2" wrench on the flats, or a larger adjustable wrench for the flat portion while the nuts are being torqued on the #C40004. What are you going to be…

view full answer...

Answer 11

The Trailer Coupler for Yakima Rack and Roll Trailers #Y08123 was designed specifically for Rack and Roll 78 inch #Y08107 or 66 inch #Y08106. If you were looking for a coupler for your trailer and have a 2" wide trailer tongue I recommend the…

view full answer...

Answer 12

I reached out to Yakima and the Trailer Coupler for Yakima Rack and Roll Trailers - 2" Ball - Bolt On #Y08123 does not come with hardware since it is designed to use your existing hardware. Yakima also had no information on what hardware would…

view full answer...

Replacement Coupler for the Yakima Rack and Roll Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching