How to Wire a Trailer Connector Harness on a 2009 Chevrolet Malibu

Updated 02/03/2010 | Published 02/02/2010

Products Featured in This Question

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(160)

$168.74

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(415)

$31.25

Question:

I have a 2009 Chevy Malibu and want to wire a 4 way flat harness to the car. Where are the wires I should tap into for the trailer harness. Are they on the right side in trunk and what color are the car wires to connect to? Thanks

asked by: john a

Expert Reply:

If your 2009 Chevy Malibu is not an LTZ model, you do not have to hard wire the connector. You can use a T-Connector style harness, part # 118450, and connect to the connectors at the back of the tail lights.

If you do have an LTZ model you will have to hardwire your Malibu using something like part # C59496. We have a video of the installation of a similar part on a 2004 Malibu that will walk you through the process. Due to the body change in 2008 and up models, the wiring may be in a different location, but the process will be the same so the video will be very helpful.

expert reply by: Patrick B