1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. No Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118450
lowest price pledge
Retail:$53.17
Our Price: $22.63
You Save: 57%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 0.71 lbs
Quantity: 
Custom Fit Vehicle Wiring 118450 - No Converter - Tekonsha
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Call 800-298-8924 to order Tekonsha custom fit vehicle wiring part number 118450 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (361)
  • Q & A (63)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118450

  • Custom Fit
  • Trailer Hitch Wiring
  • Tekonsha
  • 4 Flat
  • No Converter

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118450 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118450 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118450

Average Customer Rating:  4.8 out of 5 stars   (360 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

- 118450
by: 10/23/2020

902709



- 118450
by:

898256



- 118450
by: 09/13/2020

Easy to hook up and have used it 18 times no problems at all good job guys. John G 880444



- 118450
by:

Harness fit perfectly, worked instantly, and was less expensive than paying someone to wire. Will absolutely use etrailer again and recommend them without hesitation. 872863



- 118450
by:

867692



- 118450
by:

The wiring harness works great even one year later, thanks e-trailer. 824992



- 118450
by:
2012 Chevrolet Traverse

The website was very user friendly. I also found it very nice to have a video of the parts I purchased being installed. This made it very easy for me to install the parts once they arrived. My order was also processed and sent out the door quickly. If I need any additional towing parts, I will definitely be using etrailer.com again. 824859



- 118450
by:

This product worked well for its application. All the wires were correct for connections and installation was simple 821458



- 118450
by:

Good product. Easy to connect to vehicle existing wiring. A little challenging to run the wiring between connection points and avoid hot surfaces, like the exhaust, but with a fish tape I was able to hide and protect the wiring inside a frame tube. In hindsight I should have connected wiring before installing hitch to allow better access. 819945



- 118450
by:

Very easy installation. 815289



- 118450
by:
2012 Chevrolet Traverse

I ordered this with the curt reciever for my 2012 Chevy traverse and this wiring kit was perfect. The connections fit the factory light connections and it only took about 10 minutes to install. 803400



- 118450
by:

Quick shipping! 793963



- 118450
by:

Wiring installed properly but i added extra clamps and extra zip ties to secure extra wiring. Overall pretty clean install. 789616



- 118450
by:

Great affordable product. 779601



- 118450
by:
2016 GMC Acadia

The shipment was quick and good and so far everything was good and easy to install 773864



- 118450
by:
Chevrolet Traverse

Was very easy to install after you turning how to remove my vehicles tail lights. Have used many times to pull my boat and atv trailer. Plug has worked every time and is still in great shape. Installed it in a Chevy traverse that I installed a after market hitch on. 757467



- 118450
by:
2011 Chevrolet Traverse

Speedy delivery and great instruction videos. Worked great! 757318



- 118450
by:

Worked great 756419



- 118450
by:

Was easy to install and worked well for what we needed. 749653



- 118450
by:

Well made and extremely easy to install. 749039



- 118450
by:
2012 Chevrolet Traverse

Will never order from anyone else. So impressed with the speed of delivery and with the quality of the hitch and wiring kit. 705852



- 118450
by:

This product was simple to assemble and has worked great! 702764



- 118450
by:

No problem to install. One person job. Great product. 694419



- 118450
by:

Fit perfect and works perfect. 693519



- 118450
by:

I put it in myself and it was easy.Also did trailer hitch.They both work fine. 678835


25
366
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

  • Parts Needed To Add A 7-Way To The Chevy Traverse
    Yes, I will be happy to help add a tow package to your 2012 Chevrolet Traverse. First, you will need 4-way Flat Trailer Connector # 118450. The purpose of this item is to control and allow the basic hookup of the three lighting functions (running, turn, and brake lights) plus one pin is provided for a ground wire. Most standard light duty trailers will use a 4-pole flat connector. This custom-fit T-One connector plugs into your Chevrolet Traverse's wiring harness, which is located behind...
    view full answer...
  • How to Install a 7-Way Connector on a 2012 Chevy Traverse
    If you don't already have a wiring connector on your 2012 Chevy Traverse then that means you don't have the tow package and you need to install a 4-Way wiring harness and an adapter for a 7-Way. I am not sure what factory plug you found but when I spoke with my contact at Tekonsha he said that there was a change from the 2012 to 2013 Traverse models which is why the wiring kit # 118271 won't fit the 2012 model.If you send me a pic of the connector that you found I can try to help you identify...
    view full answer...
  • What Is the Correct Trailer Wiring Harness for a 2011 Buick Enclave Without Tow Package
    There is more than one correct trailer wiring harness for your 2011 Buick Enclave. That said, they each differ in quality. If you are looking for the best quality option then I recommend the T-One Vehicle Wiring Harness part # 118450 which is plug and play as you can see in the attached install video. If you will be towing a trailer then you are also going to need a ball mount/hitch ball and for that we have the Ball Mount Kit for 2" Hitches part # 989900 which comes with everything...
    view full answer...
  • Recommended Trailer Wiring Harness for a 2011 Buick Enclave
    Yes, we do have other trailer wiring harnesses for your 2011 Buick Enclave. For this, I recommend the T-One Vehicle Wiring Harness part # 118450 which is a completely plug and play option that will not require you to cut or splice any wires. Tekonsha brand wiring products we have found to be the most reliable which is why I recommend this harness over the other options we have for you. In regards to the old harness you had, this was more than likely caused by a short which overloaded...
    view full answer...
  • Trailer Wiring Harness Recommendation for 2015 Chevrolet Traverse
    Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and others need to have the power drawn straight from the battery to protect the taillight circuits. For your 2015 Chevy Traverse you need to install a harness that draws power from the battery to protect the taillight circuits. For that you would...
    view full answer...
  • Installation Instructions for Wiring a 2008 Buick Enclave with a T-One Vehicle Wiring Harness 118450
    I have included a link below to the instructions for wiring part # 118450 to your 2008 Buick Enclave.
    view full answer...
  • Troubleshooting Left Side Trailer Running Lights that are Not Working
    The first thing you'll want to do is determine if the problem is with the new wiring harness on your 2008 Buick Enclave or on your trailer. Both sides of the tail and marker lights run on the brown wire. Since you have only one side working the problem is most likely with the trailer. Use a circuit tester, like # 40376, and test each contact on the new 4-pole connector. If they all pass then check the wiring on your trailer. I would start by inspecting the trailer's connector, making...
    view full answer...
  • Parts Needed to Install an Electric Trailer Brake Controller on a 2009 Chevy Traverse
    The 7-Way RV style trailer connector is more common than a 6-Way. The 6-Way will not have a reverse light/accessory circuit pin. They both will have stop, tail, turn, 12 volt, brakes, and ground circuits. I recommend a 7-Way since it is the more common connector. But if the trailer has a 6-Way connector, then it would be better to go with a 6-Way on the vehicle as well. In order to install a brake controller on your 2009 Chevy Traverse, there are a few parts you will need. If the vehicle...
    view full answer...
  • Troubleshooting Running Light Function on 2005 Boat Trailer Issue
    When the running lights don't work on one side of the trailer, you want to start at the ground wire connections. Often the lights are grounded to the trailer frame through the mounting hardware so you want to check each light and make sure the light is grounded correctly. Often they are chained together so a bad ground on the front end of that chain may keep power from getting further. You can use a circuit tester like # PTW2992 to test if power is getting to each light. If not,...
    view full answer...
  • Left Turn Signal Blows After Trailer Wiring Harness Install on a 2011 Buick Enclave
    There is always a possibility that the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118450 is faulty but I would say that 90% of the time this is not the case. For starters, you will need to inspect the pins inside of each connector that goes to the taillight to ensure they are not bent or broken. If they are then this is what is likely causing the short. If the pins are not bent/broken then I would begin to trace the left turn signal wire from the harness to the...
    view full answer...
  • How Do I Tell If My 2012 Chevrolet Traverse Has a Tow Package
    In order to determine if your 2012 Chevrolet Traverse has the factory tow package you will want to look for a sticker in your glove box. If there is a three digital "V92" code shown then you have the factory tow package. If you do then you will want to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 which plugs into a single port under the rear bumper. If you do not then you will want to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer...
    view full answer...
  • Recommended Towing Set-up For 2009 Chevy Traverse To Tow 5500 lb Travel Trailer
    For your 2009 Chevy Traverse, lets start at the very beginning so I can walk you through parts needed. If you do not have a trailer hitch receiver, I recommend the Draw-Tite Class III # 75528. This is a very strong hitch that will meet your towing needs. If you don't have a ball mount, I recommend using the etrailer.com ball mount kit # 989900 that will give you different rise and drop options along with different hitch ball options to tow a trailer level. For vehicle wiring to...
    view full answer...
  • Where Does a Trailer Wiring Harness Ground on a 2012 Chevy Traverse
    The white ground wire is bundled with the yellow and brown side of trailer wiring harness # 118450 and that is the side that plugs into the left (driver's side) tail lights. The instructions are a little confusing because it doesn't actually say that you ground the white wire on the right. The step for grounding the white wire comes after routing the green wire connectors to the right side though so it makes it seem like the white wire should be on the right side. But the instructions...
    view full answer...
  • How to Install 7-Way Trailer Connector and Brake Controller on a 2011 Buick Enclave
    How you'll proceed will depend on if the trailer has brakes or not. Usually, the fact that a trailer uses a 7-way indicates that the trailer has brakes but that's not always the case. If the trailer doesn't have brakes, you'll first install the # 118450. This provides easy access to the taillight circuits without needing to cut and splice into any wiring. You'll then install the # 37185 adapter that will convert the 4-pole to a 7-way connector. The adapter will plug directly into the...
    view full answer...
  • Wiring Harness for 2009 Chevrolet Traverse to Tow Trailer With 7-Way Round Connector
    The 4-pole trailer wiring harness you referenced, part # 118450 from TowReady, is the correct plug-and-play harness for the 2009 Traverse that does not have a factory 7-way socket. In addition to this you will need a 7-way. You can use part # 37185 from Hopkins; the 4-pole flat connector from the harness will plug directly into the Hopkins 7-way, which includes a mounting bracket. The 7-way will then carry the lighting signals from the vehicle. If the trailer has electric brakes instead...
    view full answer...
  • Recommended Wiring to Add a 7-Way Connector to a 2010 Chevy Traverse
    If you already have a 4-Way Flat, like the Tekonsha T-One # 118450, installed on your 2010 Chevrolet Traverse then you will simply need to install the Universal Wiring Kit # ETBC7 to add a fully functioning 7-Way to your Traverse. I have attached a video of this kit being installed on a 2011 Traverse that you can use as a reference. The brake controller I recommend for you to use is the Tekonsha Prodigy P3 # 90195 as it has an easy-to-use LCD screen that eliminates the use of codes for...
    view full answer...
  • Trailer Wiring Harness for a 2009 to 2012 Chevy Traverse
    The Tow Ready trailer wiring harness # 118450 is designed to fit all models of the 2009 to 2012 Chevy Traverse. I have included a link to a video showing installation on a 2012 Traverse for you.
    view full answer...
  • Availability of a Replacement 4-Way Vehicle Side Plug End
    I have a solution for you. The Hopkins Wiring Harness, # HM48035, will replace the malfunctioning 4-flat plug on your vehicle. You will just need to cut off the current plug and using Deka Heat Shrink Butt Connectors, # DW05744-5, connect the new plug to your wiring harness.
    view full answer...
  • 4-Way Trailer Wiring Harness Recommendation for 2012 Chevy Malibu
    For your 2012 Chevy Malibu we have the T-One kit part # 118450 that you referenced which is a confirmed fit and will work well. It does store inside the cargo area of the vehicle when not in use. Having the 4-way run out of the back hatch is actually the preferred method although it seems like it wouldn't be. Having the 4-way stored inside the cab of the keeps it protected from rain and moisture to prevent corrosion and keeps it protected from damage to the wiring or connector by rocks...
    view full answer...
  • How Does Tow Ready Custom Fit Vehicle Wiring, # 118450 Install on a 2010 Chevy Malibu
    There are two possible trailer wiring options for the 2010 Chevy Malibu depending on which model you have. All models except the LTZ, use the Tow Ready Custom Fit Vehicle Wiring, # 118450. This is a T-One harness that plugs in line with the vehicle taillights. The connectors with the yellow wire go to the left taillight and the connectors with the green wire connect to the right taillight. The white ground wire gets attached to the bare metal surface behind the left taillight. I have included...
    view full answer...
  • Trailer Wiring Recommendation for a 2014 Chevy Traverse
    For trailer wiring for your 2014 Chevy Traverse you would want the Tow Ready Wiring Harness part # 118270. If you need a hitch you would want the Draw Tite hitch part # 75528. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
    view full answer...
  • Will Tow Ready T-One Vehicle Wiring Harness # 118450 Fit My 2010 Chevrolet Traverse w/ Tow Package
    The item you selected, T-One Vehicle Wiring Harness with 4 Pole, part # 118450, will work on all models of the Chevrolet Traverse. The # 118450 harness plugs in-line with your tail light wiring connectors and is not connected to the fuse block. To install, you would just plug in-line with your tail light wiring harness and connect the ground wire to a clean metal surface on the vehicle frame. This harness will give you a 4-way connector at the rear of your vehicle. If you are needing...
    view full answer...
  • Trailer Hitch Recommendation for 2011 Chevy Traverse
    The trailer hitch I recommend for your 2011 Chevy Traverse is the Draw Tite hitch part # 75528 because it has the best capacity, is a 2 inch size which is most popular size for hitch accessories, and it installs very easily. I attached a video that shows it installed on a similar 2011 Traverse for you to check out as well. For trailer wiring to allow your vehicle to control the taillights of the trailer you'd want the T-One kit part # 118450 because it installs without requiring any...
    view full answer...
  • Can V92 Tow Package be Added to 2012 Chevy Traverse LT
    I can definitely help you out with equipment that allows you to tow with your 2012 Chevy Traverse but it is my understanding that the V92 Trailer Towing Package (as it is called on page 9-48 of your owner's manual) cannot be added to a vehicle without the tow package. You'd need to get clarification on this from a dealer. According to my research the V92 Tow Package not only comes with a trailer hitch, wiring, and provisions for a brake controller, but there are also some other things...
    view full answer...
  • Cooler Options to Prepare 2011 Buick Enclave CXL for Trailer Towing
    According to the online information I found for your 2011 Buick Enclave CXL with front-wheel-drive, the vehicle is rated for a maximum trailer weight of 2000-lbs unless it is equipped with the trailer towing package, in which case its towing capacity increases to 4500-lbs. Both of the 2-inch hitches we offer for your Enclave have a 5000-lb towing capacity but since the vehicle is rated lower, that lower vehicle towing capacity becomes your actual working limit. The hitch I recommend...
    view full answer...
  • Light Kit and Other Ways to Add Visibility to Hitch-Mounted Cargo Carrier C18153
    For the Curt hitch-mount cargo carrier # C18153 there is no specific light kit offered but we can help you with the individual parts you'd need to install one. What you will need to do is use a light kit like # 98174LED, and then add 2 brackets # BK70BB. You will also need some self-tapping screws # FA1131822, or drill and use the hardware of your choice to mount the brackets. I noted in your purchase history that you have a 2011 Chevrolet Traverse, which will need to have a 4-pole...
    view full answer...
  • Is Drilling Required To Install Curt Trailer Hitch Receiver # 12051 On My 2011 Chevrolet Malibu LT
    To install the Curt Trailer Hitch Receiver, part # 12051, on your 2011 Chevrolet Malibu LT you will need to drill 2 holes that are 17/32 of an inch. There is a template included with part # 12051 so that you drill in the correct spots. All of the hitches available for the 2011 Malibu require drilling to install. A drawbar, pin and clip come included with part # 12051. To complete your towing setup, you may be interested in the following: Wiring, part # 118450 1-7/8 Inch Hitch Ball,...
    view full answer...
  • Trailer Wiring Harness for a 2011 Buick Enclave without Factory Installed 7-Way
    The replacement 7 and 4-Way trailer connector # HM40975 is designed to replace a factory 7-Way if your 2011 Buick Enclave came with one from the factory. If your Enclave did not come with a factory installed trailer connector and you want to add a 7-Way you would first need to install a 4-Way, # 118450. After the 4-Way is installed to add a 7-Way you would either need adapter # 37185 (if you do not need the electric brake or 12 volt functions to work on the trailer), and plug in the...
    view full answer...
  • Trailer Hitch and Wiring for 2011 Chevy Traverse LT
    The answer is going to depend entirely on the fully loaded weight of the food trailer and if your 2011 Chevy Traverse LT has the trailer towing package. I looked up a copy of the owner's manual and it states that a 2WD can pull a trailer that is a maximum of 2,000 lbs UNLESS it has the V92 Trailer Towing Package. If it does the maximum trailer weight is 5,200 lbs; if you are unsure if your '11 Traverse has the towing package you can call your local Chevy dealer with the VIN and they will...
    view full answer...
  • Trailer Wiring Harness Kit Options for 2011 Chevrolet Traverse
    Curt 4-Pole trailer wiring harness kit # C56245 fits the Chevrolet Traverse for model years 2013 through 2017. For your 2011 Traverse we do offer similar plug-and-play wiring kits and the correct one will depend on how the car is equipped. If you have the factory tow package the car will have a round U.S. Car connector under the rear bumper that will accept a 4-pole plug-in harness # 118384 or a combination 7-way/4-pole harness like # HM40975. If the car does NOT have the factory...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Brent H
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.