What Hitch and Wiring do I Need for My 2027 Honda CR-V Hybrid Sport Touring AWD?
Updated 11/19/2026 | Published 11/16/2026 >
Products Featured in This Question
Question:
Does this fit a 2027 Honda CR-V Hybrid Sport Touring AWD? The “Confirmed To Fit” notes on your website description says “excluding hybrid”.
asked by: Brad B
Expert Reply:
Hello Brad,
Welcome to etrailer, I'm glad you found us.
Trust me when I say you are not alone on this one. It confuses quite a few people, and it's something I've tried to get changed in the past. As you can see, I lost that war. What it means is that it fits all models, including the Hybrid and the models without the Hybrid.
This is how I would finish out your tow package (if you're towing a trailer with brakes, please reply below so I can get you the additional wiring and brake controller you'll need):
- Hitch: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98848. I actually have our etrailer hitch on my Escape, and I really like how the matte black blends in with the fascia for that OEM look.
- Wiring: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56370. One thing to keep in mind from our tech tips is that this wiring harness does not include the fuse required to activate the tow package. You will want to check your owner's manual for the fuse location.
- Ball Mount: BAJA Collection Ball Mount w/ 2" Ball and Hitch Pin - 5-1/4" Drop - 4" Rise - 5K # TS87VR. You will need the 1-7/8" 12pt Shallow Socket - 3/4" Drive # ALL643216 to remove the ball and switch it to the rise position. Your hitch will sit approximately 14" from the ground to the top inside of the receiver. With the 4" rise, that will put you at approximately 18", which is the height we're trying to match to the bottom of your trailer's coupler when the trailer is level. If your coupler measurement is quite a bit different from 18", please let me know so I can get you a ball mount with the correct rise or drop.
What do you plan on using the hitch for?
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: etrailer Windshield Cover for Snow - 70" Wide x 39" Tall
- Shop: Windshield Covers
- Q&A: Is There a 2026 Honda CR-V Hybrid Hitch That Doesn't Require Fascia Cutting?
- Q&A: Comparing Trailer Hitches for 2019 Honda CR-V
- Q&A: Does etrailer Hitch e98848 Fit 2025 Honda CR-V Hybrid Sport
- Q&A: Perfect Trailer Hitch for 2026 Honda CR-V Hybrid Sport
- Q&A: 2026 Honda CR-V Hybrid Hitch Comparison: etrailer e98848 vs EcoHitch EH25KR Kick Sensor & Fit Explai
- Q&A: Lighted Trailer Hitch For Carrying E-Bikes On A 2025 Honda CR-V Hybrid
- Q&A: What is Difference Between etrailer and Curt Hitch for 2019 Honda CR-V
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Bike Racks for Electric Bikes







Brad
11/18/2026
The hitch is just for a bike rake I previously bought (along with a hitch) from eTrailer for our older CRV.