Electric Stabilizer Jacks for Travel Trailer
Updated 11/18/2026 | Published 11/15/2026 >
Products Featured in This Question
Question:
I am looking to replace the hand crank stabilizer jacks on my travel trailer. I would like to install electric jacks. Is there a kit that would work with a travel trailer that I could add on
asked by: Aaron E
Expert Reply:
Hey Aaron! You have a few different options for electric stabilizer jacks on your travel trailer. If you want a complete system, the Electric Ground Control TT # LC672136 you were looking at is the best option. This gives you an automatic 5-point leveling system and also replaces your tongue jack.
If you don't want something quite that extensive, you can use the Lippert High-Speed Power Stabilizer Jack # LC44PK. The mounting holes are spaced 68-11/16" apart on center so you'll have to make sure that lines up with your frame to be able to install it.
If you have a different measurement, the Ultra-Fab Power Twin II Electric Stabilizer # UF39-941705 is the remaining option. This is adjustable so it fits 48" to 80" frame widths. It also has dual motors so each side adjusts independently.
What kind of travel trailer do you have?
Product Page this Question was Asked From
Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 lbs
- Camper Jacks
- Travel Trailer
- Stabilizer Jacks
- Steel
- 9001 - 10000 lbs
- Electric Jack
- 18 Inch Lift
- Bolt-On
- 5 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Video: Installing the Dexter Nev-R-Adjust Electric Trailer Brakes on a 2020 Taxa Mantis Travel Trailer
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC145546
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5K to 8K - Greasable Pivot
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Suspension Enhancement
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires




Psps
11/17/2026
We installed the electric ground control on our micro lite. It came with the Lippert power stabilizers. Those are just stabilizers though, and we wanted more stability along with the leveling capabilities. We have been pleased with the auto leveling. When we are ready to park camper, we plug in to power to get the added power (Lippert does suggest this). We then do the normal unhook from vehicle things like jack up, get E2 bars off, take trailer off ball. Once disconnected and move truck, then press auto level and it goes to work. While it's doing the leveling, we hook up water, black tank hose, etc. When it's time to leave, back up tow vehicle close, then just press hitch height, which returns to the last height it stored when you when you unhooked from the tow vehicle, and it goes to work getting ready to hook up. The only time you have to do anything different is if it's off about 2"+ side to side. Then you will have to put one side on a board, etc to even up a little more. We're happy with it so far, and like it better than the power stabilizers the trailer came with. In fact, if we ever get another camper we plan to get the auto levelers.