bing tracking image
Q & A Icon

Options For Replacing The Mounting Hardware On A Thule Excursion Roof Box 667ES  

Updated 10/28/2026 | Published 10/27/2026

Question:

Hi there! I recently bought an old used Thule cargo box, for only $50. It is the Excursion, 667ES. did not come with the Easysnap hardware system. I cannot find it in stock anywhere online. I have a 2016 Forester, with Thule square roof rails. Is there any way that you know of that I could attach the cargo box? Thank you so much for the help.

0

Expert Reply:

Hi Myranda!

The direct replacement for your Thule Excursion Roof Mounted Black Cargo Box 667ES is the Replacement EasySnap Mounting Hardware 1500056392. The only problem there is both of these have been discontinued for quite some time now, unfortunately. I did a bit of searching online, but it looks like there isn't anywhere that has the replacements anymore, but you may have better luck than I did.

With all that said, I think your best bet is going to be the Thule Replacement QM3 - Quick Mount Hardware - for Adventurer Cargo Box # TH04997 you were looking at. This will require drilling a few holes as the original u-bolts were 3-1/4" wide and the holes in the mounting brackets for this are 4" apart, but that really shouldn't be too difficult to accomplish. So it will be a little bit of work, but this will be the best option for you. Oh and this will have absolutely no issues mounting on those square bars you have on your roof. ^___^

What are you going to be carrying in your newly acquired roof box?

expert reply by:
0
Lazer S
TH04997 Hole Spacing
TH04997 Hole Spacing
(click to enlarge)
Steven profile picture

Steven

10/28/2026

I have the same 13 cubic foot Thule cargo box, but the one marketed by Honda (08L20-TA1-100). It's attached to the Thule rectangular bars. I paid $100 for it used but with the hardware. You could use the QM3 kit TH04997. Worst case you might have to drill some holes to match the holes in the mounting hardware, but probably not, but you might need new holes to match the exact location of your cross bars so it's centered over the bars. Of course that kit is 3x what you paid for the cargo box! I bought the QM3 kit for an older, larger, Thule cargo box that I have that the mounting hardware was deteriorating after about 25 years. It looks very similar to the hardware that came with the 13 cubic foot cargo box. At first I thought about making mounting hardware using aluminum flat plate but that was too much of a project for very little savings.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>