bing tracking image
Q & A Icon

Looking For Replacement Bearing, Seal, Race Kit For 2009 Weekend Warrior Toy Haler FSC 3200 3 Axle  

Updated 09/24/2026 | Published 09/23/2026

Question:

Hello. I have a 2009 weekend warrior toy hauler trailer model FSC 3200 triple axle. Wondering what wheel bearings, race and seal kit i need. i was having trouble locating on etrailer site. Thanks in advance.

0

Expert Reply:

Hello EJ,

Your 2009 Weekend Warrior FSC 3200 is a triple-axle trailer, and these were commonly equipped with 6,000-lb axles. I wasn't able to verify the axle capacity for your specific trailer though as we don't have a database for that stuff, so I would first check the axle tag to confirm what you have. You can also measure the diameter of the axle (6k would be 3" normally).

If yours does have 6,000-lb axles, the common bearing and race setup is:

Inner bearing: 25580
Outer bearing: 15123
Inner race: 25520
Outer race: 15245

If all that checks out, then there are two common bearing kits depending on the grease seal size:

# BK3-110 uses a 2.125" inner-diameter grease seal
# BK3-100 uses a 2.250" inner-diameter grease seal

To be 100% sure before ordering, I recommend pulling one hub and checking the numbers stamped into the inner and outer bearings. You can also check the number on the grease seal.

If those numbers are worn off, use a digital caliper like # PTW80157 to measure the spindle where the inner bearing, outer bearing, and grease seal ride. The seal surface measurement is especially important since that is what determines whether you need the 2.125" or 2.250" seal.

If you can send me the axle capacity along with the bearing numbers or those spindle measurements, I can confirm the exact kit for you. What kind of toys do you haul in the back of that rig?

expert reply by:
0
Andrew N

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>