bing tracking image
Q & A Icon

Weight Distribution Hitch for 2025 Liberty LE10K  

Updated 09/28/2026 | Published 09/21/2026

Question:

Good morning. I recently purchased a 2025 Liberty LE10K 20 foot equipment trailer. Do you have a recommendation on a weight distribution hitch? It has a 5 inch channel tongue. Also do you recommend doing anything additional to the tongue like blocks inside the channel?

0

Expert Reply:

Hi Rick! Since the loaded weight of your Liberty LE10K can vary quite a bit depending on what you're hauling, I recommend the B&W Continuum Weight Distribution System # BW78FR.

The Continuum is adjustable for tongue weights ranging from 600 - 1,600 lbs, so you can dial in the system to match the load you're carrying instead of being locked into a specific spring bar rating. It will also fit your 5" channel tongue as-is, so you won't need to add blocks or anything else inside the channel.

If you're going to be hauling the same equipment most of the time, let me know what you're carrying and how much it weighs and I can narrow it down to a more traditional weight distribution system that matches that setup if you'd rather have that option.

What will you be using the trailer for?

expert reply by:
0
Robin H
B&W Continuum
B&W Continuum
(click to enlarge)
Rick S. profile picture

Rick S.

9/23/2026

I would be hauling a tractor with a loader, 4800 lbs base weight up to 5700 lbs with implements. I also possibly may be hauling some cars and trucks anywhere from 2800 lbs to 5100 lbs. With any rear mounted implement on the tractor, the machine will have to be run all the way forward due to the length of the trailer putting the rear wheels over the axle closest to the hitch creating lots of tongue weight.

Robin H. profile picture
Etrailer Expert

Robin H.

9/23/2026

@RickS with that much variation in what you're hauling, I would definitely stick with the B&W Continuum # BW78FR. It will let you adjust the weight distribution for each load, which will be especially useful when the tractor has to sit farther forward and your tongue weight increases.
Greg B. profile picture

Greg B.

9/24/2026

I bought the Continuum system 2 years ago. I have a 30 foot Grand Design that weighs about 10k. The tongue weight is right around 900-1000 lbs. The system does pretty well with dampening sway. If it’s really windy I do get some sway but it dampens out pretty quick. The system is easy to install. Overall I’d recommend it. Just be careful not to chew up the fiberglass arms with the hitch pad that sits on the ground. I leave mine about an inch below the arms when hooked and retracted.

Robin H. profile picture
Etrailer Expert

Robin H.

9/24/2026

@GregB thanks for sharing your experience with the Continuum! That tip about keeping the hitch pad just below the arms when it's retracted is especially helpful.
Gary K. profile picture

Gary K.

9/25/2026

We have had the B&W Hitch for a little over a year now and love it. We tow a 25 foot Rockwood Mini Lite with our Toyota Tundra equipped with the Timbren load stops. Highly recommended those as well. The B&W is far better than any hitch I have used in the past.

Robin H. profile picture
Etrailer Expert

Robin H.

9/28/2026

@GaryK great to hear the Continuum has worked so well for you! Having over a year of experience towing with it is great feedback for Rick.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>