Looking for Replacement Wet bolt for 2020 Bighorn 3300DL

Question

Question:

Hello, I have a 2020 Bighorn 3300DL and 1 of the wet shoulder bolts will not take any grease. I changed the Zerk fitting, but no luck. So Im now thinking I should change this 1 wet bolt. Will the MORryde Trailer Suspension Part MR52HR work? And do I need anything else? Thanks, Jim

asked by: James J

0

Expert Reply:

Hey James, yes the replacement shoulder bolt part # MR52HR would work as a replacement for your trailer suspension. It's not uncommon for wet bolts to refuse to take grease so replacing it would be exactly what you need to do. Hows the rest of the suspension holding up?

expert reply by: Jameson C

0

Answer 1

Hi Clarence; leaf springs like the #EM48AJ you referenced and the #e39SR you ordered have a powder coat finish. This will resist the basic elements and help prevent corrosion. We also have leaf springs like the etrailer Rust-Resistant 6-Leaf Slipper…

view full answer...

Answer 2

It looks like the Single Axle Trailer Fender #PF775X21W is the same fender you have on your trailer. I went out into our warehouse and measured the distance lengthwise between the mounting holes of the fender and found it to be 18 inches.

view full answer...

Answer 3

What determines the size fender you need is your trailer's wheel size. The fender in your photo looks like the model from Redline. The smallest version of this we carry is #PF775X21W and is for wheels that are between 8" and 12". It is…

view full answer...

Answer 4

Start with the axle. Are you looking for something galvanized? We have the CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 Bolt Pattern - 57-1/2" Long - 1,800 lbs #CE33201GA-HUB which is galvanized and has all the components you'd want for…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 11

Hey Victor, yes the Long U-Bolt Kit part #RM33KT is a Roadmaster brand u-bolt kit. This does include nuts and washers as well.

view full answer...

Answer 12

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Looking for Replacement Wet bolt for 2020 Bighorn 3300DL

Product Page this Question was Asked From

Continue Researching