Recommended Trailer Lighting and Wiring Kit for a Utility Trailer
Updated 09/10/2026 | Published 09/03/2026 >
Products Featured in This Question
Question:
Wanting to add lights and side markers + wiring to a small utility trailer that has never had any, so I can try to get inspected by MSHP. Trailer is only 4 wide x 8 long. The shortest wiring package I see is your TL5RK ..... Is there a more appropriated lighting package available ? Thank you.
asked by: Jack F
Expert Reply:
Welcome back Jack! The Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness item # TL5RK would be the best option to add the MSHP legally required tail, maker, turn, and license plate lights to your trailer.
The Trailer Light Kit item # TL5RK comes with a 25' long wiring harness and a 4-way connector that'll plug directly into your tow vehicle. The extra lengths of wire can easily be trimmed away once you've ran the harness from the tongue to the rear lights.
The Trailer Light Kit item # TL5RK also includes a license plate bracket that should be mounted on the driver's side of your trailer. The driver's side rear tail light for this kit has a light on the bottom to illuminate the plate.
What do you typically haul in your trailer? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

Tom G.
9/9/2026
I am using this to refurbish an old 20' boat trailer (16' boat). As noted, just cut off the excess wire. If you don't have experience doing trailer wiring, I am sure there are YouTube videos, or I can send you something I wrote up.

Product Page this Question was Asked From
Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Square
- Surface Mount
- Submersible Lights
- Incandescent Light
- 5L x 4-1/2W Inch
- Amber
- Red
- Optronics
more information >
Continue Researching
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Q&A: Replacement Screen Frame and Interior Trim for a VD0433 Roof Vent
- Shop: GE Appliances Built-In RV Microwave - 0.9 Cu Ft - Stainless Steel
- Shop: Furrion Over the Range RV Convection Microwave - 900 Watts - 1.5 Cu Ft - Stainless Steel
- Shop: Roadmaster Dual Receiver Hitch Adapter - 6" Drop/Rise - 10,000 lbs
- Shop: Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
- Shop: Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
- Shop: Roadmaster Dual Hitch Receiver Adapter - 2" Hitch - 4" Drop or Rise - 10,000 lb
- Video: Install: Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes on a 2022 Jayco Greyhawk Motorhome
- Video: In-Depth Review of the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes
- Video: Review of SM Arnold RV Cleaner - Wash Mitts and Brushes - 38125-688
- Shop: Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Birch White
- Q&A: Length of Replacement Travel Cover Zipper for Thule Ayer Rooftop Tent
- Search Results: thule replacement
- Q&A: Do You Have a Replacement Cover for a Thule Tepui Ruggedized Autana 3 Tent?
- Video: Review of Thule Replacement Zipper Assembly Tepui Explorer Autana 4 Person Tent - TH42CK
- Video: Comprehensive Review: Electric Trailer Brake Assembly
- Video: Feature Breakdown: Replacement Travel Cover Zipper for Thule Explorer Autana Rooftop Tent
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Q&A: Recommended SnapPad Jack Pads for a HWH Leveling System on a Motorhome
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop





Vernon K.
9/9/2026
I used this kit to replace existing lights on a 6X10 utility trailer. It worked fine and the excess wire gets trimmed away.