What Size Socket Do The Lippert Swiveling Flange Trailer Wheel Lug Nuts LC57ZP Use?

Question

Question:

what size socket do these use?

asked by: Jared

0

Expert Reply:

Hey Jared, thanks for reaching out. The Lippert Black Zinc-Plated Lug Nuts # LC57ZP use a 15/16-inch (24 mm) hex, so a 15/16-inch six-point deep socket is what I recommend.

What trailer are you installing them on?

expert reply by: Jesse M

0

Lippert Swiveling Flange Trailer Wheel Lug Nut - 5/8"-18 - Qty 8
(click to enlarge)

Answer 1

Hey Neil, If you're needing some matte black wheel lug nuts, we have the Lionshead Trailer Wheel Swivel Flange Lug Nut 5/8"-18 in black part #LI84FR that is a single lug nut so you can order as many as you need. Or if you need a set of black…

view full answer...

Answer 2

Hi Kelly; I'm sorry to say the Lynx wheels were discontinued by Lionshead and the black version is no longer around/in stock. The only one we still have is the Aluminum Lynx Trailer Wheel - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Silver…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

What Size Socket Do The Lippert Swiveling Flange Trailer Wheel Lug Nuts LC57ZP Use?

Product Page this Question was Asked From

Continue Researching