Replacement Garnish for a FanTastic FV2200XWUSD81

Question

Question:

I have a 2016 Fan-Tastic vent with a cracked ceiling garnish. model FV2200XWUSD81 Do you know if this garnish will fit?

asked by: Robin J

0

Expert Reply:

Hey Robin!

The Ceiling Garnish for Dometic FanTastic Roof Vent # FVK1060-81 is the correct replacement garnish for a FanTastic FV2200XWUSD81. I confirmed with the product manual that this is actually the exact same as the one that's originally included in the kit, so you'll be good to install with no worries! Did your current one just crack over time or did something happen to it?

expert reply by: Jerry B

0

Robin J.

7/28/2026

Thanks for checking. After doing some more research. My fan has beveled corners, not square. I don't think that garnish will fit.

Jerry B.

7/28/2026

@RobinJ Could you email photos to me in reply to the notification you receive with this comment? I'm showing this is the exact one for your model, but that could've changed over the years, so I'm happy to look into it for you!

Answer 1

We have a kit made for installing roof vents, including the Fan-Tastic Vent Roof Vent #FV802250. What you need is the Roof Vent Installation Kit #344270KITW. This kit does include butyl tape, which you'll need, as well as sealant and screws. This…

view full answer...

Answer 2

The trim ring you are referencing is called a ceiling garnish. There are different colors and different depths with the ability to cut them to custom height. I've linked the page to your options to assist. All of them are 1-1/2 inches on each…

view full answer...

Answer 3

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 4

Thanks for your question, James. Both the etrailer #e98948 and Demco #DM9519336 base plates will have a very similar, low-profile look once they’re installed, so neither one really stands out more than the other. They’re both custom-fit for your…

view full answer...

Answer 5

Hey Eric, thanks for reaching out. Yes, we do have a hitch and wiring that will fit your 2026 Nissan Rogue dark armor edition. Here is what I recommend: - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e93ZR…

view full answer...

Answer 6

Hey Karl, thanks for reaching out. Yes, you can get a replacement for the 7-way socket that came with the #ETBC7L kit. For that you'll need the following: - Buyers Products Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat #337TC1474P…

view full answer...

Answer 7

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 8

Will, you're going to have to find out if the d-rings on your bumper are rated to be flat towed. If they can you can just use an adapter and a set of tow bars and you'd good. Otherwise, you're going to need to install a standard base…

view full answer...

Answer 9

The correct base plate kit for your 2016 Jeep Wrangler Unlimited to use with the Demco Excali-bar Tow Bar 9511006 is the Demco Tabless Base Plate Kit part #DM9519292 which is a custom fit so minimal modifications are required. The arms on the base…

view full answer...

Replacement Garnish for a FanTastic FV2200XWUSD81

Product Page this Question was Asked From

Continue Researching