Recommended Pre-Greased Braking Hub w/a 5 on 4-1/2" Lug Nut Pattern for a Dexter 3,500 lbs Axle
Updated 07/25/2026 | Published 07/20/2026
Products Featured in This Question
Question:
I have a 2000 Coleman Fleetwood Mesa camper with a Dexter 3500 axle. How can I determine if these will fit the spindle?
asked by: Chris L
Expert Reply:
Hey Chris. The Terran Industries Trailer Hub and Drum Assembly item # TX68VJ is designed to fit a 3,500 lbs axle with Inner bearing item # L68149 and Outer bearing item # L44649. You can check and see if there's a axle tag still legible or pull one of your existing hubs and check the part numbers stamped on the sides of the bearings.
Dexter's 3,500 lbs axles have spindles that fit a Inner bearing item # L68149 and Outer bearing item # L44649 now and back in 1999/2000 when your Coleman camper was made. The Terran Industries Trailer Hub and Drum Assembly item # TX68VJ should fit perfectly. If you'd like me to confirm you can send a picture of the axle tag directly to the email address you receive this response from.
The Terran Industries Trailer Hub and Drum Assembly item # TX68VJ is sold individually and has a 5 on 4-1/2 lug nut pattern. This hub comes with pre-greased and installed bearings and seals. You can pop this thing right out of the box and install it on your camper.
The Terran Industries Electric Trailer Brakes item # TX97ZJ are the correct ones if you're needing to replace the brake assemblies. These are sold as a pair and attach to a 4-bolt brake flange.
How often do you get to use your camper and where do you like to take it?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
Product Page this Question was Asked From
Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Terran Industries
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will Terran Trailer Hub/Drums TX68VJ 3,500 lb Axle Replace Dexter K08-247
- Shop: Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Cleaning and Replacing Hubs and Bearings
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: timbren vehicle suspension
- Search Results: trailer axles
- Search Results: timbren trailer suspension parts
- Shop: Brake Controller
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator - DX79UR
- Video: Choosing the Right Tow Bars
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Shop: Blue Ox Tow Bar Adapter Brackets for Demco Classic Base Plates
- Shop: Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: How to Choose a Trailer Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hubs and Drums
