Does Autowbrake Electric Brake Controller Need Reverse Lockout

Question

Question:

Does AutoBrake have a lock-out feature for backing up with a trailer?

asked by: CHUK

0

Expert Reply:

Hey Chuck, unlike with surge brakes you don't need to have a reverse lockout with the Autowbrake Electric Brake Controller # 3430001 or any electric brake controller because the brake controller does not interpret reversing as braking. Do you have a trailer that has had surge brakes?

expert reply by: Jameson C

0

Dave

7/3/2026

I would buy it again. Best controller I've had.

Jameson C.

7/6/2026

@Dave glad you like it! What makes it better than other options you've used?

Dave

7/7/2026

@Dave My truck had on board trailer brake system. It failed and the factory was unable to repair. No one makes a brake controller to fit my truck. After much research, E trailer offered to try this controller. I did and I love this controller. Very easy to install. The smooth operation is excellent. Dave

Jameson C.

7/7/2026

@Dave Awesome! I'm really glad it's working well for you!

Rocky

7/4/2026

Chuck. I’m not sure what you mean by lock out feature the brake controller I bought works just like the brake controller you install in your vehicle. Unless you press on the brakes or hit both buttons on your fob the brakes on the trailer will not engage.

Jameson C.

7/6/2026

@Rocky thanks for adding that!

Answer 1

Hey Philip, it looks like its the Baby Moon covers part #AM90086 that keep falling off your wheels. I looked into what people do to keep this on their wheel and it looks like silicone sealant does a really good job holding these on. We have that in…

view full answer...

Answer 2

Hey Daniel, thanks for the part number. You'll still need to install a 7-way connector on your 2022 Toyota RAV-4 hybrid to power the Autowbrake Electric Brake Controller item #3430001. The 4-Way like item #C59236 that fits your RAV-4 does not…

view full answer...

Answer 3

To answer your first question, there isn't a traditional "adapter" to allow the 7 way on your trailer to plug into a 4 way connector on your vehicle- at least not in the manner that you're thinking of. For that reason you would…

view full answer...

Answer 4

The wires of the Autowbrake Electric Brake Controller #3430001 are 14 gauge and were intended to be wired directly too a junction box where from there would run to all of the circuits of the trailer wiring. I would only run 18 gauge to lights and for…

view full answer...

Answer 5

You could use the trailer mounted battery to power the Autowbrake Electric Brake Controller #3430001. However, it is possible that the unit will deplete the battery and you won't have any trailer brakes. The battery could receive a maintenance…

view full answer...

Answer 6

I can honestly say that both the Autowbrake Electric Brake Controller #3430001 and the Tekonsha Prodigy RF are both great controllers. I think you will be happy with either of them on your 7K horse trailer. The only reason we currently do not have…

view full answer...

Answer 7

Great News! The Autowbrake Electric Brake Controller part #3430001 does not require a reset if it loses power. It is designed to store the settings until the next use of the trailer and will be at the same settings as when you disconnected. It is…

view full answer...

Answer 8

Both the Autowbrake Electric Brake Controller #3430001 and Tekonsha Prodigy RF Wireless Trailer Brake Controller #TK94FR are great options to add a brake controller to the trailer. This is ideal if you have one trailer that you need to use the brake…

view full answer...

Answer 9

You will need a 12 volt battery that is rated for more than 55 amps to power your electric winch. Any battery that meets those requirements should work well for you. For most winches that usually means a car battery. I have included a link to the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Autowbrake Electric Brake Controller Need Reverse Lockout

Continue Researching