What Bearing Kit do I Need for My Dexter Axle 7K with 8 Lug Hubs?
Updated 06/02/2026 | Published 05/29/2026
Products Featured in This Question
Question:
Looking for bearings/seal kit for Dexter axle Serial S005638692 7000K, 8 lug Thanks in advance
asked by: Daniel M
Expert Reply:
Hello Daniel,
Thanks for including the serial number and axle capacity. That was very helpful!
Based on the Dexter serial number you provided, the correct bearing and seal kit for your 7,000 lb, 8-lug axle is the Bearing Kit, 14125A/25580 Bearings, 10-36 Seal # BK3-200.
This kit includes the inner bearing, inner race, outer bearing, outer race, grease seal, cotter pin, and tang washer needed to service one hub. Be sure to order one kit per hub, so if you have a single axle trailer you'll need two kits, and if you have a tandem axle trailer you'll need four kits.
When you're ready to install the new bearings, you'll want to thoroughly pack them with grease before installation. If you don't already have wheel bearing grease on hand, I recommend the LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16 oz Can # L11380. It's designed for high-temperature applications and works great for trailer wheel bearings.
What kind of trailer are you working on?
(click to enlarge)
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36
- Shop: 3-Wire Pigtail for TecNiq Trailer Lights - Weathertight Plug - 6" Lead
- Shop: DeeMaxx Trailer Idler Hub for 7,000-lb Axles - 8 on 6-1/2 - Galvanized
- Shop: DeeMaxx Trailer Idler Hub for 8,000-lb Axles - Oil - 8 on 6-1/2 - 9/16" Bolts - Galvanized
- Shop: DeeMaxx Trailer Idler Hub for 8,000-lb Axles - Grease - 8 on 6-1/2 - 9/16" Bolts - Galvanized
- Shop: Replacement Chrome Bezel for Peterson Piranha Oval Tail Light - 7-3/4" Long x 3-1/2" Tall
- Shop: TecNiq LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Q&A: What Type of Brake Fluid Should be Used in the Titan BrakeRite Electric Over Hydraulic Actuators
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-200
- Video: Hands-On with the Dexter Nev-R-Adjust Electric Trailer Brakes
- Video: All You Need to Know About the Dexter Nev-R-Adjust Electric Trailer Brakes
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Replacement Brake And Hub/Drum Assemblies For A Dexter 5957430 Trailer Axle
- Q&A: What Bearings and Seals do I Need For a Torflex #11 Torsion Axle Rated for 5,200 Pounds?
- Q&A: Should Trailer Tires Always be Inflated to Their Max PSI
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended Bike Rack For Front Mounted Hitch For Increased Visiability
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Shop: Brake Controller
on Trailer Bearings Races Seals Caps
Tc
5/30/2026
These worked great on our 7K trailer with twin axle setup. I already had the "D" washers and lock tabs to secure the hubs and bearing adjustmentd. Now would be the time to free up, clean and lube the brake linkage. T