Availability of Traditional SAE 7-Way With 4' to 6' Wire Harness for Utility Trailer

Question

Question:

Looking for a 7 way SAE pig tail 4 - 6 foot for utility trailer.

asked by: Lee J

0

Expert Reply:

Hey Lee! For a traditional SAE pigtail you can use the TowSmart 7-Blade Trailer Connector # TS74RR. This is 6' long and uses the SAE wire colors indicated by the purple reverse circuit. It is worth noting that you can really use any of the 7-way blade pigtails as long as you match up the functions.

What are you hauling in the utility trailer?

expert reply by: Robin H

0

Traditional SAE
(click to enlarge)

Answer 1

We offer a metal trailer 7-way with the part #HM48510 which would be the toughest 7-way out there.

view full answer...

Answer 2

Hey Con, this is a great question but it really comes down to how easy do you want it to be to replace rotors. The slip on kits are pretty easy to swap rotors on as they just "slip on" to the hub over the studs. Whereas a hub/rotor kit like…

view full answer...

Answer 3

Hi Ed; the TowSmart 7-Blade Trailer Connector #TS74RR is a standard 7-way connector. This will work with electric trailer brakes and has all of the other typical functions found on 7-way wiring. Are you replacing the connector on your trailer or is…

view full answer...

Answer 4

The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already installed on the trailer…

view full answer...

Answer 5

Hey there Mohan. The Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs #e37YR you were looking at already has an idler hub on it which is not setup for brakes. You would need to replace the axle with something like…

view full answer...

Answer 6

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

view full answer...

Answer 7

Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…

view full answer...

Answer 8

Hey Bob, thanks for reaching out. We do have pins that will work with the etrailer Adjustable 2-Ball Mount #e66PR. There is not a direct replacement for the pins available, but you can use the Replacement Pins and Clips for Curt Adjustable Channel…

view full answer...

Answer 9

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

Answer 10

Hey Dave, Usually, trailer tires are not balanced with weights like car tires because if the trailer weight changes it can cause the weights to vibrate off. So what trailer tire and wheel manufacturers will do is line up the heavy spot in the wheel…

view full answer...

Answer 11

To attach a strap to the Fulton winch part #F142412 you have to use a bolt to secure it to the drum. The part #FWS20HD0200 does not come with a bolt so you'd have to supply that or an easier option would be to go with a strap that has a bolt that…

view full answer...

Answer 12

The HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi #HS381-8067 you were looking at does not include the breakaway switch battery, so one must be purchased separately. This kit is compatible with a 5 amp hour…

view full answer...

Availability of Traditional SAE 7-Way With 4' to 6' Wire Harness for Utility Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching