Replacement Mounting Brackets for Firestone Ride Rite Bags for 2008 Toyota Tacoma

Question

Question:

Do you sell just a bracket kit for a 2008 Toyota Tacoma I have the air bags for said truck. Thank you.

asked by: Randy W

0

Expert Reply:

Hey Randy, since the Firestone Ride Rite kit that fits your 2008 Toyota Tacoma would be the part # F2407 the correct replacement hardware would be the part # F2135825491, # F5494, and # F2135825492. You'd need a quantity of two of each of these.

Then for replacement hardware part # FA217602407.

expert reply by: Jameson C

0

Randy W.

5/6/2026

Thank you for your assistance.

Jameson C.

5/6/2026

@RandyW glad I could help!

Answer 1

We have the bracket you are looking for, I spoke with my contact at Firestone and the correct bracket you are looking for your Firestone kit part #F2407 is the part #F5494. I attached a picture that has all of the fasteners sizes that come with the…

view full answer...

Answer 2

Yes, the Firestone Ride-Rite Air Helper Springs part #F2407 will work on a 2017 Toyota Tacoma so long as the axle is below the leaf springs. That said, you'd also need the Firestone Axle Bracket Extension Kit for Lifted Vehicles part #F2506 to…

view full answer...

Answer 3

The correct spacer you will need for the Firestone Ride-Rite Air Helper Springs part #F2407 on your 2012 Toyota Tacoma is actually going to be the Firestone Axle Bracket Extension Kit part #F2506. These will then bolt to the side of the vertical…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 9

Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…

view full answer...

Answer 10

I couldn't find an order with us so I'm not sure what you purchased before but etrailer hitch you're looking at, part #e98850, is custom designed to fit the Toyota Tacoma from 2005 through 2015. I'm also not sure where you're…

view full answer...

Answer 11

Hey Shane, so the Timken bearing kits are made in the USA so what would be perfect for you would be the part #TMK52VR is a USA made 3,500 lb axle trailer bearing kit. Have you had bearing problems in past?

view full answer...

Replacement Mounting Brackets for Firestone Ride Rite Bags for 2008 Toyota Tacoma

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching