Looking for Bearing Kit for 2023 Keystone 22MLS
Updated 05/02/2026 | Published 04/28/2026
Question:
Hello, I am looking for a bearing kit for my Lippert axels on my 2023 Keystone 22MLS LCI52-SBSA-85-68.5-NOSP-OS-L-65517-7278-30PT-CAP 4400 V001 Can you point me in the right direction?
asked by: Scott V
Expert Reply:
Hey Scott, for a Lippert 4,400 lbs axle you will need the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles item # BK2-100. The kits for the 3,500 lbs axles fit the 4,400 lbs ones too so hope this clears up the confusion. You will need one kit per hub. Did you have a bearing failure or do you want to keep a spare set on hand?
David
5/2/2026
Have a trailer that sat awhile and was going to do some moving with heavy loads over distance. Wanted no problems so changed out all bearing, seals and caps. Kit arrived in timely fashion, good instructions, complete. The outside bearing rim needs some persuading. Hand packed with grease, then added move thru cap fitting. Several trips, no issues.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: morryde cre 3000
- Search Results: red and tacky
- Search Results: bk2 100 bearing kit
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: Camco RV Vinyl Trim Insert - Black - 100' Long x 3/4" Wide
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Q&A: Bearing Kit With 25580 & 15123 Bearings For Lippert Axle
- Q&A: Replacement Brakes, Hubs, Bearings, And Grease Seals For Lippert Axle V000470363
- Shop: Replacement Shackle Link with Bolts for Dexter Trailer Suspension Kits
- Video: Dexter Trailer Suspension Kit Replacement Shackle Link with Bolts Review
- Q&A: Wet Suspension Bolt vs a Regular Suspension Bolt
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
Scott V.
4/30/2026
Thanks, I purchased the trailer used and not sure how well it has been taken care of. I plan to check the bearings and repack shortly, but did one to have one on hand if needed. Thank you.