Can I Purchase Just the Actuator and Not the Entire Mount for a Drum A-60 Surge Brake Actuator?

Question

Question:

I have a a-60 surge break actuator drum on my boat trailer that needs replacing. I dont need the bolt on or weld on housing as mine is already welded to the trailer. Can i buy the actuator without the housing? As in the master cylinder and everything inside the housing that are held in with the 2 pins through the housing

asked by: Devin J

0

Expert Reply:

You sure can Devin! Since you have a A-60 surge brake actuator, you'll want the Replacement Inner Member item # DX97FR. The capacity was increased on the A-60 from 6,000 lbs to 7,500 lbs but the dimensions are the same.

The Replacement Inner Member item # DX97FR is designed to work with drum brakes and has a 2" coupler. You'll just need to pop out the pins and unscrew the brake line to swap them out.

What kind of boat do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

DX97FR
(click to enlarge)

Answer 1

Jorge, since the Demco Drum Brake Actuator #DM28CV doesn’t include a built-in lockout, you can install a manual lockout with kit #DM93CV. This is easy to install without tools, and will do a good job of preventing the brakes from engaging so you can…

view full answer...

Answer 2

Hey Howard! Yes, I think the Replacement Inner Member for Dexter DX7.5L Brake Actuator #DX97FR will replace what you have. It has the same body, just a different coupler on the end, so it will line up in the old housing. If you want to save some…

view full answer...

Answer 3

What you have is a UFP A-60 drum brake actuator Philip so to replace just the inner member what you would need is the part #DX97FR and you'd be set.

view full answer...

Answer 4

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 5

The UFP 34044 is basically the Dexter DX7.5L A-60 part #DX89FR. The second number you mentioned is actually a phone number. But the #DX89FR would be an exact replacement for what you have.

view full answer...

Answer 6

Thanks so much for the photo, which shows you have a UFP A-60 actuator, which is the same as the Dexter DX7.5L A-60 Brake Actuator - Drum #DX33FR. I can confirm that the correct replacement inner member for both actuators is the Replacement Inner…

view full answer...

Answer 7

Thanks for the picture and your patience! I did some research and made some phone calls, the correct replacement for your actuator is the Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs item…

view full answer...

Answer 8

Hi Charles, While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator #DX33FR. This is the entire actuator assembly along with the…

view full answer...

Answer 9

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Can I Purchase Just the Actuator and Not the Entire Mount for a Drum A-60 Surge Brake Actuator?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching