Replacement Hubs to go From a 5x5 Bolt Pattern to a 5x4.5 On a 3500 lbs Axle
Updated 04/16/2026 | Published 04/08/2026
Products Featured in This Question
Question:
I have a 2025 Buck Dandy LB510 trailer 3500 axle with a bolt pattern 5x5 I want to convert it over to 5x4.5 do u have a kit for me pls 84 axle
asked by: Jerry
Expert Reply:
Thanks for your question, Jerry!
We have just what you need. Since I’m not sure if you need just an idler hub or a hub/drum combo, I’ll include both options for you.
Idler Option: Part # AKIHUB-545-35-EZ-K
Hub/Drum Option: Part # AKHD-545-35-EZ-K
Both are already pre-greased, so that will make installation a little easier.
The bearings used on 3,500 lb axles are the same between the different bolt patterns, so swapping over to a new hub setup like this should be a straightforward process.
Do you already have your new wheels picked out?
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Spindle Dimensions of a 3500 lb Axle
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Q&A: Surge Brakes for Demco KK260 Tow Dolly
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Rod
4/15/2026
Jerry I did my brakes and hubs 2 years ago. Have Dexter axles 3.5k each didn't change the bolt pattern just stuck we original design. The break kts are plug n play, esy to install. The hubs came with prep greased bearings so just slide on and tighten the bearing bolt. Recommend these.