Question

Question:

How do I know if I cann add another panel? I currently have a 200W Solar Panel w/30AMP 12V Controller that came with our travel trailer. Would this expanandable unit work with it? We have a 100aH and 80aH battery and a 2000w inverter.

asked by: Lloyd H

0

Answer 1

Hey William, the RS-M200 Rich Solar Mega 200 Solar Panel #RS23FR features a 9 busbar (9BB) cell configuration. What all are you powering with solar?

view full answer...

Answer 2

Hello April, thanks for reaching out. The Fantastic Vent 4000BT is a standard 12v roof vent so that can be used to replace a manual vent as long as you have a way to get power to the vent. That said, the 4000BT is an older model that we no longer…

view full answer...

Answer 3

Hey Deven, thanks for reaching out, and good question. For a 12 volt system, the charge controller can handle one 200 watt panel. For 24v systems it can do two 200 watt panels. So while the kit technically is expandable, with your 12v system, the one…

view full answer...

Answer 4

I was able to find the 126003 hub and was able to determine that it is a 3,500 lb hub/drum with a 5 on 4-1/2 inch bolt pattern just like the #AKHD-545-35-K that you referenced. This hub will work as a replacement for your Lippert.

view full answer...

Answer 5

It sure can Ken. The PowerMax 30A RV Power Center and Distribution Panel item #PM67VR is designed to accept a standard 120VAC, 30 Amp input, which is what you'll get with shore power provided by most generators. This power center has a 55 amp…

view full answer...

Answer 6

Unfortunately, it will not Brian but thanks for the picture. Our Replacement Fabric for etrailer Slide-Out Toppers has a different attachment method so it will not work with your Solera RV Slide-Out Awning item #LCV000177334. The only replacement…

view full answer...

Answer 7

Hey Dale, it looks like you ordered the Go Power 200 Watt Solar Panel Kit part #34282182 which does come with 4 z-brackets. I do like what mentioned using the aluminum square tube as well as riveting the other side to the roof. This would for sure…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Tim, we do have other options as well that fit the 2.5 inch hitch size like with the Weigh Safe True Tow part #WS59MR which your tongue weight would work great with and comes with a shank that can do a drop of up to 6 inches. This also has a…

view full answer...

Product Page this Question was Asked From

Continue Researching