Base Plate For 2024 Chevy Colorado ZR2 Bison  

I have a brake buddy system and planning to use it on the Colorado Thank You very much for your help Best Regards Gilles

I installed the e-trailer tow bar system. It was an easy install on my 2024 Colorado Trailboss. It will not accept Blue Ox tow attachments. They are different.

Not sure the confusion here on the blue ox attachments. I installed this on my 2024 colorado z71. I already had the blue ox tow bars system, the blue ox system will match up perfectly to this base plate. the install is way easier then described in the videos, you dont have to remove the entire from clip like they do in the video. My friend and I did this install in about 3 hrs with no lift or special tools.

I had to install a battery disconnect on my 2024 Canyon.This is to prevent the electronic parking brake from accidentally destroying

I installed the etrailer base plate and diode wiring kit also battery disconnect solenoid . 1) removed whole front grill very hard task 2) remove tow hooks easy 3) install etrailer tow plates in place where tow hook removed , top bolts were little tricky ,used red lock tight and torque all to specs easy 4) diode wiring kit kit starting from front of truck and hooked ground directly to battery also mounted 6 prong plug to front steel frame under louvers then followed main wire harness to rear of truck. Not too difficult then wired diode kit to rear lights by removing rear taillights and unplugged harness to light as directed in wiring diagram of diode kit little trouble understanding instructions but figured it out 5) batterie disconnect switch as per instructions easy 6) reinstall front grill and cut out where needed to get 6 wire plug in center of truck very tough Just take your time and it will look like professional job note if you can afford it get a professional. Removing and installing grill very hard