Do U-Bolts Get Replaced When Installing Hellwig EZ-990 on 2021 Toyota Tacoma

Question

Question:

Do I need to replace the u bolts when I install the helper springs

asked by: Travis

0

Expert Reply:

Hey Travis, when installing the Hellwig EZ-990 # HE24FR on your 2021 Toyota Tacoma you would end up replacing the U-bolts of the truck but this kit comes with them so you wouldn't need to source that elsewhere. Are you current U-bolts in good shape?

expert reply by: Jameson C

0

Answer 1

Hey Dan, here's all of the trucks the Hellwig EZ-990 kit #HE24FR is designed to fit: 2016 - 2023 Toyota Tacoma 2014 - 2015 Toyota Tacoma excluding Pre-Runner 2014 - 2015 Toyota Tacoma Pre-Runner What truck do you have?

view full answer...

Answer 2

Thanks for reaching out, Kyle. According to the online owner's manual, the 2020 Toyota Tacoma TRD Off Road has a max towing capacity of 6,500 lbs. So based on this, yes, I think you can definitely tow a 2017 Passport Ultra Lite with a 4,400 lb…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…

view full answer...

Answer 8

Hey Travis, when installing the Hellwig EZ-990 #HE24FR on your 2021 Toyota Tacoma you would end up replacing the U-bolts of the truck but this kit comes with them so you wouldn't need to source that elsewhere. Are you current U-bolts in good…

view full answer...

Answer 9

Hey Justin! I’d look at the etrailer Sidewind Trailer Jack - Swivel Bolt - 2K #e35YV for that. It mounts to the trailer frame instead of staying in the center A-frame jack location, and it fits trailer frames 2" to 4" tall; it should fit…

view full answer...

Answer 10

Hey Uli. So long as your 2025 Mercedes G-Wagon has a 2" hitch, the Kuat Pivot v3 Swing Away Hitch Extender item #KU38CR will work great. There is one measurement you'll want to take though because I see a couple of different hitch options…

view full answer...

Answer 11

The correct Carr Super Hoop Custom-Fit Side Step for your 2019 Toyota Tacoma is the part #CARR124501-1. For the pair you can use part #CARR124501. These are confirmed to fit your truck (I verified this with my contact at Carr) and all the needed…

view full answer...

Answer 12

Welcome back Jim! The Yakima FlipFlop High-Low Adapter item #Y64MX will indeed work to help lower the deck height on your cargo rack. It'll lower the 2" receiver connection by 2-1/8". The Yakima FlipFlop item #Y64MX has a 350 lbs weight…

view full answer...

Do U-Bolts Get Replaced When Installing Hellwig EZ-990 on 2021 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching