Looking For Bearing Kit For 1986 Calkins Boat Trailer
Updated 02/23/2026 | Published 02/16/2026
Products Featured in This Question
Question:
Im looking for bearing kits for single axle 1986 Calkins Boat Trailer GVWR 3500 lbs Any suggestions? Thanks Jeff
asked by: Jeff P
Expert Reply:
Hey Jeff, thanks for reaching out. We do carry a bearing kit for a standard 3,500 lb axle, the Hub Bearing Kit # BK2-100. This comes with the # L68149 (1.378" inner diameter) inner bearing, # L44649 (1.063" inner diameter) outer bearing and 1.719" ID/2.565" OD seal. Your axle should use this same standard sizing, but since it is so old I do suggest you pull a hub and double check those bearing and seal dimensions just in case. If you find something different is needed just let me know the specs and I am happy to look into it.
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Is There Trailer Bearing Kit With Bearings L44649 & L68149
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: How to Bleed Your Trailer Surge Brakes
Terry P.
2/20/2026
As Jesse states, best to measure your current bearings, and look for any part numbers. I used this kit on my 2006 Karavan tandom axle (3500lbs) boat trailer. I do have a spare set to be prepared.