Replacement Brake Actuator for a 2013 Ranger Bass Boat Trailer

Updated 02/10/2026 | Published 01/21/2026

Products Featured in This Question

Replacement Inner Member for Dexter DX7.5L Actuator - Tandem Axle w/ Disc - 2" Ball - 7,500 lbs

(61)

$409.59

Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K

(250)

$354.86

Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs

(23)

$321.81

Question:

Looking for brake actuator for 2013 Ranger Bass Boat Trailer

asked by: mark d

Expert Reply:

Hey Mark, welcome back! If your 2013 Ranger Bass Boat Trailer has a UFP Model A-60 Marine Surge Brake Actuator similar to item # DX89FR, you can replace it with the Inner Member for Dexter DX7.5L Actuator item # DX99FR, you were looking at.

The Inner Member item # DX99FR will install inside the housing that's already attached to your trailer's coupler. This actuator works with disk brakes. If you have drums you'll need item # DX97FR.

If you could get me a part number off of your trailer's actuator, I can confirm that the Inner Member item # DX99FR is exactly what you need.

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

DX99FR
(click to enlarge)

Mark D.

1/21/2026

Part 203951 is the Cabelas part number. Can I send a picture? Mark

Jerred H.

1/22/2026

@MarkD Yes, you can. You can send any pictures you have directly to the email address you receive this response from. Do you see any other part numbers? The 203951 one didn't come back with anything.

Flash

1/23/2026

@MarkD I used the dx 7 shown above on my 2014 ranger trailer and it worked perfectly

Mark D.

1/27/2026

Jerred That is what it has. Just ordered one. Thanks Mark

Jerred H.

1/28/2026

@MarkD You're welcome!

Alden S.

2/10/2026

This was super easy install on my Malibu/bakes trailer! “Plug & play” I also used a master cylinder bleeder kit to purge the lines. Everything works great!!