Parts Needed to add Electric Brakes on a Trailer With a Timbren Axel-Less Set Up
Updated 01/27/2026 | Published 01/04/2026
Products Featured in This Question
Question:
Hey. I have an off-road trailer with Timbren 3500lbs axleless suspension. I want to add trailer brakes to this setup. The axles do have the flange for a brake setup. I’m looking for a 5x5 drum if possible. Do you guys offer a setup for these?
asked by: Curt M
Expert Reply:
Hey, Curt!
I’d be happy to help you get set up with brakes for your Timbren suspension.
Since you mentioned this is an off-road trailer, those typically use Timbren’s HD spindles. If that’s what you have, you’ll need hub-and-drum assembly # AKHD-655-6-EZ-K, which has a 6 on 5-1/2 bolt pattern, not the 5 on 5 bolt pattern you're after.
However, if your trailer doesn't have the HD spindles then you can get part # TRU86AV. This hub/drum does have the 5 on 5 bolt pattern that you're after.
The compatible brake assemblies for that would work for either of the hubs is part # TRU96FR (sold as a pair).
Also, what kind of trailer connector do you currently have? If it already has a 7-way, the wiring for brakes may already be in place. If not, I can outline exactly what you’d need to complete the setup.
If you can confirm whether you have the HD spindles, or send the bearing numbers off your existing hubs, I’ll make sure we nail down the exact parts you need and get you rolling with the right setup.
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Video: Review of TruRyde Trailer Hubs and Drums - Trailer Hub And Drum Assembly 3500LB 10 x 2-1/2 - TRU66AV
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: grease seal 10 19
- Q&A: Solution for Replacement Seal for 171255UC Oil Seal
- Shop: Titan 5 on 4-1/2 Hub and Drum - Hydraulic Brakes - 10"
- Video: Titan Trailer Hubs and Drums - Hub with Integrated Drum - T1543900CB042 Review
- Video: Feature Review Dexter Hydraulic Trailer Brake Kit
- Video: Hydraulic Trailer Brake Kit: The Breakdown
- Video: A Closer Look at the Dexter Hydraulic Drum Brake Assembly
- Video: Review of the Hydraulic Trailer Brake Kit
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Grease Seal Kit- Triple Lip - Inner Diameter 1.719" - Outer Diameter: 2.565" - Qty 2
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Right Hand - 3,500 lbs
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Q&A: Replacement Bearing Kit for a 2018 Trailstar Pontoon Boat Trailer
- Video: Dexter Hydraulic Brake Line with Fittings Spec Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Search Results: trailer jack
- Shop: Brake Controller
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Shop: Vehicle Tow Bar Wiring
- Shop: Vehicle Tow Bar Brake System
on Trailer Hubs and Drums
Gwendolyn Y.
1/27/2026
Hey Curt, how did things go adding the electric brakes to your off-road trailer with the Timbren axleless suspension? Were the hub and brake assemblies a good fit for your setup? Your update could make it easier for the next person working on a similar trailer.