Replacement 1/2-20x2.25 Wheel Studs
Updated 01/05/2026 | Published 12/29/2025
Products Featured in This Question
Question:
Weve got a 2006 Airstream whose wheels have seen better days. We picked up a set on FBM but when I went to mount them, the lug threads were short compared to the old wheels. Do you carry replacement lugs that I can press in? I believe they are 1/2-20x2.25. But I could be wrong.
asked by: Phil B
Expert Reply:
Hello, Phil!
We do carry replacement wheel studs. The DeeMaxx drive-in wheel stud part # DE53GR would get pressed in from the back of the camper hub so that you can mount your rim to it.
I've included a picture below showing all the dimensions of the stud so that you can compare to make sure it will work for you. We do carry other lengths of studs that are the same 1/2-20 so if you need something longer let me know.
(click to enlarge)
Product Page this Question was Asked From
DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- DeeMaxx
more information >
Continue Researching
- Search Results: coupler
- Search Results: drum
- Search Results: spindle nut
- Search Results: 3/4 bearing
- Search Results: 13 pin
- Search Results: advent
- Search Results: l44643
- Shop: Advent Air RV Air Conditioner System - Single Zone - 15,000 Btu - White - R32
- Shop: Replacement Grease Cap for Kodiak 7,000-lb, 7,200-lb, and 8,000-lb Disc Brake Kits
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12" - 5 on 4.5 - Pre-Greased
- Shop: Advent Air Low Profile RV Air Conditioner System - Single Zone - 15,000 Btu - White - R32
- Video: Breaking Down the Timken Replacement Trailer Wheel Bearing-TMK89FR
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Video: Demco Explains the EZ Latch: The Coupler That Latches Itself
- Q&A: Comparing Pacbrake to Firestone and Air Lift Air Bags
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Pacbrake Alpha Air Bag Suspension Kit Review and Comparison
- Shop: Brake Controller
on Accessories and Parts
Phil B.
1/4/2026
What is the narrowest lug nut you have that will match these threads? Maybe it is a case of the nuts I have being too wide? The socket wrench I'm using doesn't fit down the nut whole on the rim.