Hitch-Mounted Crossbar Rack For Yakima Ski And Snowboard Carriers

Question

Question:

Will my older Yakima ski holder clamp onto these bars, or do I need an adapter kit?

asked by: Lena

0

Expert Reply:

Lena, good news - clamp-on Yakima and Thule ski mounts (and other brands) fit the Benton crossbars on the Benton cargo rack # B42FR without any adapters. Since skis are longer, you’ll likely want to mount your ski rack on the left and right crossbars, which slide and run side-to-side across the back of the vehicle. That way your skis sit left-to-right like they would on a normal roof rack and don’t stick straight back toward the liftgate.

The fixed front and rear bars run front-to-back, so they’re better suited for shorter gear or midsized cargo boxes that don’t need as much span.

How many sets of skis are you planning to carry?

expert reply by: Andrew N

0

skis and snowboards on benton basic hitch
(click to enlarge)

Rob

12/11/2025

I have a Thule snowboard holder. will it clamp on?

Andrew N.

12/11/2025

@Rob Hey there Rob. Yes, snowboard holders like one form Thule will clamp on jut fine! Mount it to the left/right sliding bars so the boards run side-to-side and clear the hatch.

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 5

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 6

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 7

The best set of air bags for your 2024 Chevy Silverado 2500, that are compatible with an in bed hitch, are the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs capacity that will level out the rear end of your…

view full answer...

Answer 8

Hey Scott! The correct bearing kit for your Dexter 6k axle is the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the Dexter version it is the #DX26ER. What kind of trailer do you have?

view full answer...

Hitch-Mounted Crossbar Rack For Yakima Ski And Snowboard Carriers

Product Page this Question was Asked From

Continue Researching