Looking For Bearings And Seal For 2024 Grand Design Reflection With Curt 6,000 lb Axles

Updated 08/11/2025 | Published 07/26/2025

Question:

Looking for TIMKEN bearings and seals for our 2024 Grand Design Reflection with Curt axle part number: 120414, axle also has item number on it V000845629, sticker states capacity: 6000 lbs, manufacture date 4/26/24. Thanks for your assistance karen

asked by: Karen W

Expert Reply:

Hello Karen, thanks for reaching out. We should have the hub you need, but I will need a bit more information from you first. There are a few possible bearing combinations for the 6K axles, and we want to be sure you are getting the right thing.

The main piece of info I will need is the part number for your hub. If you remove a wheel, you should see a number cast on the front of the brake drum. I should be able to use this number to pull up your exact bearing sizes and seal size.

Reply on this page with that hub number and I am happy to look into it.

expert reply by: Jesse M

Karen

8/4/2025

here is the number 2021027038. thanks

Jesse M.

8/5/2025

@Karen Hey Karen, that does not look like a hub part number. I was not able to find any references to it online. Typically the hub part numbers will be four digits like for example 8-201 is a common Dexter hub number. It should be right on the front of the hub/drum. Do you see any other number on there?

Karen

8/9/2025

@JesseM the other numbers we see on the brake drum is 0824. if this is not the number could you cross reference with the actual numbers off of the bearings themselves?