Will Spindle Nut Kit for EZ Lube Axles Fit 5,100 lb Dexter Axle on 2022 Grand Design Reflection 295R  

Hey Steve, there isn't a way to use a middle X-factor with a Roadmaster comfort ride system unfortunately.

Hey Richard, thanks for reaching out! Yes, the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR can be installed with the Roadmaster Comfort Ride #RM-2460-2570. Just as long as the X-Factor is installed on either of the end hangers as…

Hello Robert, thanks for reaching out. The Roadmaster Comfort Ride is a great choice for a suspension upgrade. This system is compatible with the MORryde X-Factor Crossmembers, so you can add those to all 3 hangers if you wish. One thing I would do…

We don't have these parts fit guided for individual trailers, but as long as your 2018 Grand Design Reflection 150 5th Wheel trailer has tandem axles with a 7000-lbs each capacity, the Roadmaster Comfort Ride #RM-2460-2570 is the correct…

You can get the longer U-bolts here; I checked with Roadmaster, and the 2630 are simply 7 inch long U-bolts, so you can use the following: - 3" Round Trailer U-Bolts (Qty 2) #SP01-060 These are 7 inches long so they are the same, and for a…

It definitely will Paul. The spring seats on the Trailer Axle with Idler Hubs item #e52GR are welded on at an 80" spacing. All you'll need to do is bolt this up where your current axle sits. You will want to replace the U-bolts though.…

Hello Paul, thanks for reaching out. The correct grease seal for your Dexter 5,100 lb axle is part #GS-2250DL. It has a 2.250" ID and 3.376" OD. Let me know if there is anything else I can help with an I am happy to get back to you.

Hey Craig, thanks for reaching out! I believe the Optronics Fleet LED Trailer Tail Lights w/ Grommets #TLL12RK will work as replacements for your 2008 Featherlite 4926 trailer, but you'll need to confirm this on your end. These lights carry the…

Hello again Steve; sorry for the trouble, sometimes our system doesn't play nice with pictures. I'm not seeing any calipers or rotors in the parts diagram there, only standard idler hubs. I can tell you that the bearings are #L68149 and…

The difference between the standard and EZ hubs is in the grease cap. For instance, the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles #AKHD-545-35-EZ-K is the same hub, bearings, seal, and races as found in #AKHD-545-35-K but the grease cap…

For the right hand side 18-3/8 inch long equalizer for 2-1/2 inch wide slipper springs you can use #13-140-3. It can actually be used as a left or a right.

Hi Don, So long as it isn't too old, yes, you can use the Dexter Replacement Trailer Axle Spindle Retainer Kit #DX82CR on your 84 D spindle. It just needs to have been made after June 2002 and you're good. If you aren't sure when your…