Does the Correct Track Trailer Alignment and Lift Kit Have Enough Brackets for a Tandem Axle Traile?
Updated 10/20/2025 | Published 10/18/2025
Products Featured in This Question
Question:
How many brackets does this kit come with? For a tandem axle trailer I count needing 2 brackets per hanger which should be 12 this kit shows 8 brackets in the picture. Is the picture wrong or am I missing something?
asked by: Matt
Expert Reply:
Hey Matt. You're not missing anything. The information is mixed in throughout the product page but it still causes confusion.
The Correct Track Trailer Alignment and Lift Kit item # RR23QX only comes with 8 brackets. This will give your tandem axle trailer a 1-1/4" lift.
If you want the full 2-1/4" lift you'll need the Correct Track Trailer Alignment and Lift Kit - Triple Axle item # RR55QX, which includes all 12 brackets.
Please note that this lift kit does not work with MORryde CRE3000 equalizers.
What kind of trailer do you have?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Article: How to Raise Your Travel Trailer Height
- Q&A: Can a Reese Goosebox Pin Box Be Used On a 2024 Keystone Cougar 355FBS
- Q&A: Best Way to Lift Tandem Axle Trailer Suspension 2 inches
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Does Correct Track Trailer Alignment Kit # RR23QX Come with Enough Brackets for Tandem Trailer
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Q&A: What Trailer Lift Kits Will Work with the MORryde CRE3000 Equalizers
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Replacement Suspension Parts & Lift For 2012 Skyline Koala 27CDS With 3,500 lb Axles
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Matt
10/20/2025
Its for a boat trailer that I need lifted as the clearance is pretty bad. I guess I will go with the tripe axle option as I need all the lift that the kit advertises. I feel like the product information should be edited to make this more clear. Anyways, thanks for the quick reply.