What Grease Is Recommended for Slider Assembly of Husky Fifth Wheel Hitch

Question

Question:

I recently bought a truck with a Husky 15k EZ Roller hitch and it needs some lubrication on the roller bars/wheels. Can you recommend the best lubricant to use?

asked by: Greg D

0

Husky Slider Hitch Roller
(click to enlarge)

Expert Reply:

Hey Greg, for the slider assembly of a Husky slider fifth wheel hitch white lithium grease is recommended like the part # L11354. This grease does best job while also not allowing dirt to be drawn to it like WD40.

expert reply by: Jameson C

0

Jameson C.

10/30/2025

Hey Greg, how did the white lithium grease work on your Husky 15k EZ Roller hitch? Your feedback could really help others trying to keep their slider hitches moving smoothly.

Answer 1

The grease fitting that is on top of the head unit on your Reese 5th Wheel Trailer Hitch, #RP30084, is used to lubricate the pivot points of the jaws. Using a lithium grease, #L11354, is acceptable. You will also want to lubricate the jaw itself, and…

view full answer...

Answer 2

You will want to consult the manual for the hitch you have to determine if there is a specific type of lubricant needed and for all of the areas that need to be lubricated. I do not recommend a spray lubricant such PB Blaster for 5th wheel hitch…

view full answer...

Answer 3

You will want to use a white lithium grease for the grease fitting that is on top of the head unit on your B & W 5th Wheel Companion Trailer Hitch, #BWKRVK3300. I recommend using item #L11354. This is a multi-purpose white lithium grease that…

view full answer...

Answer 4

The first thing you should do is check that the head assembly is still square in the slider support frame. Loosen the bolts holding the head to the support frame with the slider locked in towing position and re-torque the bolts to the manufacturers…

view full answer...

Answer 5

The VD0434 number that you mentioned is actually the screen part number on your Ventline fan. Knowing that, the replacement motor should be the Ventline part #BVD0218-00 which is for Ventline, Ventadome, and Vanair Fans. If you are replacing this on…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 9

Hey Nicholas, thanks for the pics and information. To replace your Dometic Brisk II 9105304474 AC, I recommend the Advent Air RV Air Conditioner System item #ADV99QR in white or item #ADV69QR in black for a ducted setup. The Advent Air RV Air…

view full answer...

Answer 10

Hey Andy! For the heavy snow and cold temperatures you get in western Montana, I recommend the Adco SFS AquaShed RV Cover #290-52254. This is designed for 5th wheels that are 28' 1" - 31' long, so it will be a good fit for the overall…

view full answer...

What Grease Is Recommended for Slider Assembly of Husky Fifth Wheel Hitch

Product Page this Question was Asked From

Continue Researching